Procharger install Questions

[KidCapri50]

I just bought a stage II procharger and plan on installing this on my 01 GT with 54,#%$ miles on it. ( Just waiting for the ups man )

I currently run a cai, 4:10's, accufab plenum and 75mm tb, diablo tune and undrives.

Do I need to install factory pulleys?

Are 4:10's to low of a gear?

What recommendations on clutch and flywheel.

I know I'll have to return it to factory tune due to the fact that Procharger uses SCT.

Just any info to get me heading for the right mindset would be appreciated.

 

[Stangdriver1119]

Yes you need to install the factory pulleys and 4.10's might be too tall of a gear actually if you're running a manual which it sounds like you are.

 

[stangmbo]

Do I need to install factory pulleys?

Are 4:10's to low of a gear?

What recommendations on clutch and flywheel.

I know I'll have to return it to factory tune due to the fact that Procharger uses SCT.

Just any info to get me heading for the right mindset would be appreciated.

I recommend to you to install SPEC clutch and retune the computer, 4.10 is too low the 3.73 is better to you

 

[LaserRed01GT]

You don't HAVE to re-install the stock pullies, because you can just run a smaller blower pulley. But, if it were me, I would re-install the stock pullies so that you can run a larger blower pulley. The bigger the blower pulley you can get away with the less the chance of belt slippage.

4.10's, in my opinion, will be a waste of tire with a Pro Charger. I'd recommend you go with no bigger than a 3.73 or you will have major traction problems.

Centerforce, Ram, and SPEC all make good clutches. Which model will depend on how much power you think you'll end up making.

 

[GToddyT5]

I'm not a big fan of my Spec on the street. It would probably be a great option for street/strip though, as it picks up quickly.

 

[lvmustanggt]

I just bought a stage II procharger and plan on installing this on my 01 GT with 54,#%$ miles on it. ( Just waiting for the ups man )

I currently run a cai, 4:10's, accufab plenum and 75mm tb, diablo tune and undrives.

Do I need to install factory pulleys?

Are 4:10's to low of a gear?

What recommendations on clutch and flywheel.

I know I'll have to return it to factory tune due to the fact that Procharger uses SCT.

Just any info to get me heading for the right mindset would be appreciated.

May I ask, how much did it cost ?

 

[swl987]

I recommend to you to install SPEC clutch and retune the computer, 4.10 is too low the 3.73 is better to you

Does anybody give a predator tune with a procharger system. I hate to have to pay for another programmer.

 

[steveb24]

just sell the diablo