procharger users chime in!

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
heya i will be running into som cash here soon. i have always wanted a nice SC for my car.

all of you probably know my cars mod.
thumper e7s
b-cam
typhoon intake and pretty much every bolt on.

the procharger kit looks excellent. self contained, comes with an A/A intercooler standard and doesnt mess around with low boost (5 psi) it comes out of the box making 9 psi ( at least on a stock engine) with the intercooling i can safely run more boost without as much fear of knocking and probably wont have to retard timing.

exactly how much is the retail on a new kit from procharger? and are there any places i can save some money. i know they are alot more than vertech or paxton.

and how is the install? does it just add another bracket to the drivers side?? thats what the pics i have seen look like.

i was hoping if i ran one of these kits i'd make maybe 7-8 psi with the bigger pulley since i have ported heads and better intake and what not, i wouldnt have quite as much restriction as a stock engine.
 
What kits are you looking at, I get pretty good deals...

P1SC with a 2 core is the standard kit (3 core would be an upgrade), you could go D series and keep the boost down with the large pulley.

The kits are very complete and come with near everything you need to install. I prefer the ATI's myself... I have an F1R ;)

Boost is realtive, with higher flowing componets you will make less boost since the motor is using more of the air. I woudl say keep it 8psi or lower on your combo unless you have ungraded rods bolts etc...

If I can help let me know,

Rick
rnhperformance.com