"Project FordStrokers 385 Pinks All Out" Norwalk OH

revhead347 said:

The TKO600 is definately a better tranny if you got a good deal on it. Just don't forget to order a 26 spline clutch for it.

Kurt

Click to expand...

Since my G-Force is a 26 spline I already have a Custom clutch from Wally @ Pro-Motion. Im going to re-use this clutch as thats what Wally wants me to do.

Thanks!

Robert

Here's a small piece of the project

YEAHLOH95 said:

nice build hope to see it at carlisle , what about a powerglide? that would help with traction

Click to expand...

As I told you on SCS I have a deal lined up on a Liberty Face-Plated TKO 600

I have another guy that wants to trade a full built C-4 set-up for my G-Force that I have for sale.

Sill weighing all my options.....

Picked up a few parts today and heres a shot of one of them.

Mike down at www.WolfpackSpeed.com is building me an all brand new bullet-proof 8.8.

All the internals will be supplied by Dave at Team Z Motorsports - Suspension Kits and Components for hardcore Mustangs & more!

Wolfpack built 8.8 w/ welded axle tubes and Big Ford Late 9" ends welded on by Continental Competition
Strange 35 spline lightweight spool
Strange 35 spline axles
Strange "S" series rear street/strip lightweight brake package
Trickflow Girdle/cover
Motive lightweight 4.88 gears

Here's a shot of the cover I picked up yesterday and the rest of the parts are heading straight to Wolfpack's shop.

UPDATE:

I picked up a Liberty Face-Plated TKO 600 and Pro-5.0 shifter for an extremely nice price!

Picked up a 93 Lightning smog pump to use as a vacuum pump which bolts right into my 94 Cobra acc. bracket where my factory smog pump came from.

Just got my rear-end back and they welded the axle tubes up, welded on Ford Late Model 9" ends on and welded in my axle braces. Im dropping it off for sandblasting and then powdercoating tommorow then off to assembly via Mike @ www.WolfPackSpeed.com

YEAHLOH95 said:

rob where did you get the braces from ?

Click to expand...

I bought them years ago from PHP- Pauls High Performance in Michigan.
Im not sure if there still make them or if there even is business anymore.
Its a bolt in kit but I had mine welded in also to help with strength!

Going to have to re-name this:

"Project FordStrokers 369 for Pinks All Out"

Dart 8.2 deck block
FordStrokers 4340 Forged Steel 3.400 stroke crank
Scat 4340 Forged Steel H-Beam Rods 5.400 w/ ARP 2000 Bolts
Probe SRS 2618 Forged Pistons (Flat tops) 4.155
Clevite 77 Bearings throughout
ARP Main Studs
Canton 7 qt. Oil Pan

Were getting close and im very excited!
Thanks again to Jim & Nicole at FordStrokers!

Also calling tommorow to order my new custom cam!