• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Projector headlights on a 96?

  • Thread starter Thread starter Kappa2006
  • Start date Start date Dec 6, 2005
K

Kappa2006

New Member
Aug 23, 2004
36
0
0
Dec 6, 2005
#1
  • Dec 6, 2005
  • #1
My stock headlights need to be replaced on my 96 gt and I was looking into some projector headlights I found on ebay for about $150. Does anyone have pictures of projectors on a 1994-1998 mustang? I want to see what they would look like on the actual car. I can't tell if it would look good or out of place on the car. Any pics would be great, and some feedback on the ebay projectors would be good too. Thanks a lot.

Brian
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Dec 6, 2005
#2
  • Dec 6, 2005
  • #2
They look just like altezzas but on the front...

See sig...
 

jeffnoel

Founding Member
Aug 31, 2002
1,638
5
37
Clovis, CA
Dec 6, 2005
#3
  • Dec 6, 2005
  • #3
Which set on eBay are they one piece models? I've got projectors on my 02 any the only grief I get about them is here.
 

Henceforward

The Avatar Master
Founding Member
Jul 17, 2001
485
0
0
Dec 6, 2005
#4
  • Dec 6, 2005
  • #4
The clear version looks a whole lot better than the smoke/black version.



But remember, they do not have a side reflector either clear, or amber. Amber is the only legal option, so you have to keep that in mind.

Keep the old set for inspection, and hope you don't get written up for it during a traffic stop.
 
M

mijo_latino

Active Member
Apr 16, 2004
179
1
29
Canton, Michigan
Dec 6, 2005
#5
  • Dec 6, 2005
  • #5
View attachment 495312

If your looking for these, the light output isn't that great. It's actually worse then stock. I'm not sure about the one piece like above, but for $100 more you can get at least the projector correct(if HID's are too expensive). All you need to do is open up the housing and switch out the lenses and reseal. The lenses below can be unscrewed and mounted in place of the others, so that you can still use the stock bulbs.

http://www.hidplanet.com/bosch.html

While i was retrofitting my HID's into the housing above, I tried some silverstars and just the bosch lenses compared to the stock lens, and it was 100X better.

How are those one piece projectors on light output and more importantly cut-off? I would love to tinker with them.

And just for you Kilgore, my rear...

View attachment 495314
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Dec 6, 2005
#6
  • Dec 6, 2005
  • #6
View attachment 495310
Ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhrgh
 

blackink00

I missed a shift & stole Curt's money.
Mar 30, 2005
545
0
0
Tempe, AZ
Dec 6, 2005
#7
  • Dec 6, 2005
  • #7
ill do one for killy also
View attachment 495306
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 7, 2005
#8
  • Dec 7, 2005
  • #8
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Dec 7, 2005
#9
  • Dec 7, 2005
  • #9
Anyone have pics of a car with these healights?

View attachment 495276
 
A

ALEX2028

New Member
May 10, 2005
57
0
0
Dec 7, 2005
#10
  • Dec 7, 2005
  • #10
Latino do you have a pic or part number of the lens that you replaced on your projectors. i want to replace the lens on my projectors because the output is really bad. i have the same headlight shown on your car.
 

trailblazr81

Member
May 17, 2003
571
0
16
Hollister, Cali
Dec 7, 2005
#11
  • Dec 7, 2005
  • #11
Personally I dont like the look of projectors. I would spend $200-$300 for some HID. Really improve your lighting. And its a pretty simple straightforward conversion. Just plug n play.
 
M

mijo_latino

Active Member
Apr 16, 2004
179
1
29
Canton, Michigan
Dec 7, 2005
#12
  • Dec 7, 2005
  • #12
ALEX, the ones I linked to are the ones i used, just mine came with the other components aswell. Same place i bought them too. They have a great forum to research things.

If you look closely at the pic you notice that the projector can be unbolted by 4 screws, you just need that front half. It's pretty much a straight swap.

Also usually those that go with just fitting HID's and not
the projectors end up blinding oncoming traffic, the projectors need to be in place.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Dec 7, 2005
#13
  • Dec 7, 2005
  • #13
mijo_latino said:
View attachment 495230

If your looking for these, the light output isn't that great. It's actually worse then stock. I'm not sure about the one piece like above, but for $100 more you can get at least the projector correct(if HID's are too expensive). All you need to do is open up the housing and switch out the lenses and reseal. The lenses below can be unscrewed and mounted in place of the others, so that you can still use the stock bulbs.

http://www.hidplanet.com/bosch.html

While i was retrofitting my HID's into the housing above, I tried some silverstars and just the bosch lenses compared to the stock lens, and it was 100X better.

How are those one piece projectors on light output and more importantly cut-off? I would love to tinker with them.
Click to expand...


They are the projectors i tried on my 96...i thought the light output was equal to or less then stock....so don't waste your money..go for some clear lense headlights and you'll be happy.


Heres what i switched to...with clear fogs also

 

Attachments

  • 000_0062small.webp
    36.5 KB · Views: 130
F

FalconGuy016

New Member
Oct 26, 2004
437
1
0
Northern VA
Dec 7, 2005
#14
  • Dec 7, 2005
  • #14
To be honest, the rear Altezzas don't look so bad on the white stang, but... but.... black... no
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Dec 7, 2005
#15
  • Dec 7, 2005
  • #15
FalconGuy016 said:
To be honest, the rear Altezzas don't look so bad on the white stang, but... but.... black... no
Click to expand...

I have a set of those brand new in the box if someone is interested...pm me
Xmas present from here
http://www.latemodelrestoration.com/lrs.aspx?ref=mu&gotopage=/content_50_home.aspx

 
A

ALEX2028

New Member
May 10, 2005
57
0
0
Dec 7, 2005
#16
  • Dec 7, 2005
  • #16
latino are these the parts you used for your conversion
2) Bosch Projectors
(2) Hella/Philips LVQ-212 G3 Ballasts
(2) D2S HID Bulbs
(2) Ballast Covers/mounts
(2) Ballast connectors


also did you have to make your own wire harness
 

Outlaw97GT

Member
Sep 10, 2005
234
0
16
Redneckville, Tx
Dec 7, 2005
#17
  • Dec 7, 2005
  • #17
tomustang said:
Click to expand...
.........Thanks guys, now Im craving chinese food!
 
M

mijo_latino

Active Member
Apr 16, 2004
179
1
29
Canton, Michigan
Dec 7, 2005
#18
  • Dec 7, 2005
  • #18
hey ALEX, yeah i made my own harness also thats exactly the package i used to go HID. I got sold on the idea that its all OEM parts off of Audi's so the quality is superior and only for about $390.

All the parts needed could be found at RadioShack. About ~$20 to make it and there's a how-to in the University section of hidplanets' forums.

I know most will say that $400 for some lighting is way too much, but hey, it has more function then a shakerhood, bling wheels, body kits, mufflers etc(all which are cool if done right).
 
O

o0akoni0o

New Member
Oct 26, 2004
175
0
0
Fremont, CA
Dec 8, 2005
#19
  • Dec 8, 2005
  • #19
i think you guys with the altezzas need something like this to compliment them.
 

Attachments

  • brandsportinc1871609284112ta.webp
    2.8 KB · Views: 96
D

dstang01

Member
Sep 22, 2005
170
0
16
Vancouver, BC
Mar 28, 2008
#20
  • Mar 28, 2008
  • #20
DropTopPony said:
They are the projectors i tried on my 96...i thought the light output was equal to or less then stock....so don't waste your money..go for some clear lense headlights and you'll be happy.


Heres what i switched to...with clear fogs also

Click to expand...

what headlights and corners are these?
 
You must log in or register to reply here.

Similar threads

6
2010 V6 Sees differently than GT?
  • 6t9Mach1
  • Mar 31, 2026
  • 2010 - 2014 Specific Tech
Replies
2
Views
192
2010 - 2014 Specific Tech Apr 1, 2026
6t9Mach1
6
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
281
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
230
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
285
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
L
SN95 headlights - where can I buy more adjustment screws?
  • lparsons42
  • Jul 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
310
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2025
lparsons42
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?