Pulling the engine

bigjstang

New Member

Jun 24, 2006

15

0

2

Dec 18, 2012

#1

• Dec 18, 2012

• #1

hey guys im sure this has been covered but i have been unable to find just what im looking for. im pulling the engine out of a 89 notch carb car. whats the best place to connect the chains. im trying to avoid pulling the heads off and i dont have that carb plate to pull from. whats the best spot to lift from outside of those. thanks for the help guys.

 

MikeH686

Mine is only two inches though.

10 Year Member

Oct 11, 2011

2,843

1,753

184

Waldorf, MD

Dec 18, 2012

#2

• Dec 18, 2012

• #2

The front and back of each head... just thread it in there good enough not just a tad bit this is how i got mone out with aluminum heads at that

 

rd

Founding Member

Jan 12, 2000

3,316

63

109

Ocean Springs MS

Dec 18, 2012

#3

• Dec 18, 2012

• #3

Yep, one bolt in the accessory mounting holes on the end of the heads, one front and one in the rear.

Or one in each of the four corners if you have an engine tilter.

 

f8tlfiveo

My wife likes my spool and blow-off valve.

Aug 8, 2007

1,585

102

64

Lancaster, PA

Dec 18, 2012

#4

• Dec 18, 2012

• #4

rd said:

Yep, one bolt in the accessory mounting holes on the end of the heads, one front and one in the rear.

Or one in each of the four corners if you have an engine tilter.

Click to expand...

Did the same thing, used a lifting strap,no engine tilter... Really easy..