• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Push button Ignition...4 Dummies!

  • Thread starter Thread starter SmittyFox5.0
  • Start date Start date Jan 26, 2006
S

SmittyFox5.0

New Member
Dec 2, 2002
32
0
0
Detroit, Michigan
Jan 26, 2006
#1
  • Jan 26, 2006
  • #1
Well, I wouldn't exactly describe myself as a dummie but I'm kinda confused. My goal is to add a push button ignition to my stang 93 LX. I don't want to use the key at all. I hear that if you eliminate the ignition tumbler (whatever it's called) that the steering will not lock. Now, how many switches do I need? I would think 1 to activate the ignition, 1 for the accessories, and 1 momentary for the starter. Next, how do I wire all these switches in? I would think that there is a circuit for each of these three function attatched to the ignition switch. Do I just run the wires to the appropriate switch and then ground the other post on the switch? Also, what current rating do I need to look for when buying my switches? Thanks in advance to anyone that can help.

Smitty
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 27, 2006
#2
  • Jan 27, 2006
  • #2
Bad idea. If you can't read electrical diagrams and have no understanding of basic automotive electrical systems, you are bound to make a road kill mess out of it.

AutoZone wiring diagrams

http://www.autozone.com/servlet/UiB..._us/0900823d/80/16/71/3c/0900823d8016713c.jsp for 79-88 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/19/59/5a/0900823d8019595a.jsp for 89-93 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp for 94-98 model Mustangs
 

stangjunkie

New Member
Nov 15, 2004
381
0
0
Jan 27, 2006
#3
  • Jan 27, 2006
  • #3
not only a wiring nightmere but what if i decide i wanna smash you window in and as soon as i realize that there are no keys im takin your car
 

Shadrack

New Member
Aug 2, 2005
95
0
0
Jan 27, 2006
#4
  • Jan 27, 2006
  • #4
I'm eventually going to be doing this. But i'm going to have a key'd cutoff switch wired in the dash, as well as one located (keyless) INSIDE the trunk hidden somewhere where no one will find. hehehe
With my aluminum dash full of autometer gauges, I think adding "helicopter" style toggle switches in an aluminum panel where the A/C controls are would be badass. Just my imagination running wild for the time being.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 27, 2006
#5
  • Jan 27, 2006
  • #5
my carb car is push button start but you still need the key in and on to activate the alternator.....can you imagine a car crook thinking he is really smart stealing a car with a push button start and getting about 5 miles before the car dies? haha
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 27, 2006
#6
  • Jan 27, 2006
  • #6
Modular2v said:
my carb car is push button start but you still need the key in and on to activate the alternator.....can you imagine a car crook thinking he is really smart stealing a car with a push button start and getting about 5 miles before the car dies? haha
Click to expand...
What if his chop shop is only 3 miles away? One Mustang now in 1000 pieces...
 
S

SmittyFox5.0

New Member
Dec 2, 2002
32
0
0
Detroit, Michigan
Jan 27, 2006
#7
  • Jan 27, 2006
  • #7
Well, I can read electrical schematics, that's not the issue. I am also not concerned about theft, They wont get very far without a steering wheel. I have a quick disconnect on it so I take it in the house with me at night. I'm not looking for advice on whether or not I should do it but an explaination of how to do it. This is more of a race themed car that is ocassionally driven on the street.

View attachment 489655

View attachment 489656


View attachment 489658

View attachment 489660

I know. I have a lot of work to do. Soon as it warms up.
 
B

bcd

New Member
Jun 23, 2005
274
0
0
arab al
Jan 27, 2006
#8
  • Jan 27, 2006
  • #8
you might look into a switch that kills the battery you can get them on ebay pretty cheap. i was thinkin about it since i read about all the people on here gettin their cars stolen.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 27, 2006
#9
  • Jan 27, 2006
  • #9
SmittyFox5.0 said:
Well, I can read electrical schematics, that's not the issue. I am also not concerned about theft, They wont get very far without a steering wheel. I have a quick disconnect on it so I take it in the house with me at night. I'm not looking for advice on whether or not I should do it but an explaination of how to do it. This is more of a race themed car that is ocassionally driven on the street.
Click to expand...
If that is indeed the case, then the link to the Autozone diagrams will provide you to all the information you need.

Much of the automotive electrical work I have seen has been very poorly done. I hope that you are an excellent electrical tech and have success with your efforts.
 

ExplodingGopher

New Member
Jun 11, 2004
517
0
0
The mistake on the lake (Ohio)
Jan 27, 2006
#10
  • Jan 27, 2006
  • #10
You mean a setup like this?:

 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Jan 27, 2006
#11
  • Jan 27, 2006
  • #11
I moved my ignition right under the armrest. Everyone thinks its the best think in the world. I also have kill switches all over the car.
 

87_stang

Member
Dec 12, 2005
131
0
16
Tonganoxie, KS
Jan 27, 2006
#12
  • Jan 27, 2006
  • #12
I would put the switches in your armrest or low profile switches in the ashtray. Custom make your own switch panel that setdown nicely in the ashtray. Thats what Im gonna do I think. I would just keep it somewhat hidden with shut-off switches hid in other places.
 

ExplodingGopher

New Member
Jun 11, 2004
517
0
0
The mistake on the lake (Ohio)
Jan 27, 2006
#13
  • Jan 27, 2006
  • #13
FYI , the setup that i posted above still uses they key to unlock the steering and tru the msd ignition on with the gauges. The push button starts it, and the other switched are for fan, fuel pump, acc. So its still safe to a degree.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 28, 2006
#14
  • Jan 28, 2006
  • #14
One thing about relo'ing an ignition switch that I worry about (it was a concern when working on bikes way back when) is putting the cylinder (or in these cases, switches) somewhere that is shrouded. You dont want someone to pull your switch panel out and jump terminals on the back of a switch. This would also be my concern with relo'ing an entire lock cylinder, though I think it is safer elsewhere (a la old 911's, Saab's, etc).
 
8

84coupe306

New Member
Jan 22, 2006
12
0
0
Rocky Face,GA
Jan 28, 2006
#15
  • Jan 28, 2006
  • #15
My car is push button and it requires the key but I want the key ignition to work again but I cant figure out how they got this damn thing wired.I'm not very skilled in the wiring department.
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Jan 28, 2006
#16
  • Jan 28, 2006
  • #16
HISSIN50 said:
One thing about relo'ing an ignition switch that I worry about (it was a concern when working on bikes way back when) is putting the cylinder (or in these cases, switches) somewhere that is shrouded. You dont want someone to pull your switch panel out and jump terminals on the back of a switch. This would also be my concern with relo'ing an entire lock cylinder, though I think it is safer elsewhere (a la old 911's, Saab's, etc).
Click to expand...

This is why I have kill switches in a few different spots. Many theives actually know 5.0s very well. They can break the ignition lock in a matter of seconds and already know what wires to splice and connect. The relocation of the ignition gives them something different to work with and the kill switches make it that much harder to trace wiring. I just look at it this way, if they really want it, they'll probably get it.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 29, 2006
#17
  • Jan 29, 2006
  • #17
JBeezy53 said:
This is why I have kill switches in a few different spots. Many theives actually know 5.0s very well. They can break the ignition lock in a matter of seconds and already know what wires to splice and connect. The relocation of the ignition gives them something different to work with and the kill switches make it that much harder to trace wiring. I just look at it this way, if they really want it, they'll probably get it.
Click to expand...

And then again if they want it bad enough theyll tow it away . Alot of cars arent that hard to "hotwire",and no im not a thief or anything. when I was putting in my mom's remote start in her 97 honda, once i found out what wires were what I started it and had it running with a Paper Clip! It certainly got hot within a few seconds but with a thick wire it would have been fine to drive away with, and only took a couple screws to get to the ignition switch(or in a thiefs case he would break it apart). My mom saw her car running and she had her keys and she wanted to no how i started her car without her keys. I was like uhh a paper clip? I also have a switch inline with my ignition and starter solenoid, (even though someone could just give it 12v from under the hood in 2 seconds), im going to add another one into my MSD box or my fuel pump just in case.
 
You must log in or register to reply here.

Similar threads

M
67 Mustang Ignition Switch Wiring Diagram needed
  • Michaelell
  • Sep 14, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
524
1965 - 1973 Classic Mustangs -General/Talk- Jan 3, 2026
Michaelell
M
2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
494
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
A
Resolved Fuel Pump issue - test port jumped comes on (87 LX)
  • afjLX
  • Nov 16, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
3K
Fox 5.0 Mustang Tech Nov 26, 2024
afjLX
A
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
496
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
541
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?