Pushrod Length...and Update

Give trick flow a call to ensure, but I believe the TFS-2500100 would work while giving you some room for cam upgrade. If I remember right, stock PRs are at 6.25, but TF can validate that when you call. They seem to have decent product for the price.

With regard to TFS just went through this: There pushrod checker is NOT .050" per turn like Comp Cams which is .050" per turn. The TFS pushrod length checker is actually around 0.034" in reality per turn. I called TFS and they stated that their pushrod length checkers are for overall length which is stupid because once you have the overall length you still need a specialty tool to measure the pushrod checker. Whereas, the Comp Cams pushrod length checker you just add .050" to each turn of the base length dimension so much easier. Summit was also not aware of this. This little unknown mistake caused me to get too long of a pushrod the first time. Summit told me each turn was 0.050" which is true for the Comp Cams pushrod checker but sent the TFS pushrod checker since I didn't care which brand I got since they are both major brands. Unfortunately, no uniformity and ease to the consumer. So people might want to specify the Comp pushrod length checker until TFS gets it act together and makes a difficult situation easier like Comp Cams already does.