Pushrod Length On Gt40p Heads

[Mavros]

I tried a search buy could not find a setup that utilized the stock cam.

Here's my setup:
Stock short block and cam
GT40P heads
1.72 roller rockers
I do not have a pushrod length measuring tool and wanted to see if anyone knew what size I need to order?

 

[LILCBRA]

I could be wrong, but I don't think you'll have a problem with stock push rods with this combo. But, if you want to check everything, you will need the adjustable push rod and the instructions I provided in this thread the other day:

http://www.stangnet.com/mustang-forums/threads/procomp-aluminum-heads.889942/z

 

[mikestang63]

You'll be fine with stock length pushrods and the stock cam with 1.7 RR.

 

[Mavros]

Thanks guys, hopefully if the rain holds off I can get the heads bolted on on Sunday and can check and see if the stock ones work.

 

[Bob91vert]

Yup, as long as the cam is stock your good with standard length. I did the same setup and did not even have to shim anything to get the proper adjustment on the valves. You'll like the setup if your looking for a mild mannered street car. You won't hear the cam, but you will feel good gains in power. I topped it off with a edelbrock rpm intake, 70 mm tb, 76 mm maf and bbk shorties.