Pushrod question

[Down]

First off: I know I need to check length, etc. and I plan to.
I'm just asking so I'm prepared, worst case scenario, etc. This might be a "have to get it done real quick thing" on putting the stock headson, and it'll only have to last <1Kmi, tops.

I have a 95 GT w/ TW heads, 1.6 rr, tfs stage 1 cam. I'll be replacing that w/ stock heads and rockers. I'll then be putting the heads/rr onto another car w/ an e-cam.

i have the pushrods on the 95 now (6.75, a set of stock pushrods, and maybe another random set laying around).

Any guesses on pushrod length onstock heads/stage 1 cam set-up?
How about on the tw/1.6rr/e-cam set-up?

Thanks,

J

 

[AznStanger3v]

i have not a clue for TW, but i know AFRs use the stock length, just hardened

 

[Down]

Anyone else?

 

[TenorPlayinGuy]

The stock length pushrods are 6.272" long.

You can pick up a set cheap around 30-45 bucks.

 

[Down]

Wow, that's a thread resurrection.

I haven't even owned a Mustang for a year and a half or so.

Thanks though.