quad shocks revisited

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
I posted awhile back about clearance issues with the kyb quads and my tire/rim width, they wouldn't fit even inverting them didn't work. I got some replys to help me out and they said to try and cut the dust shield. I did this but the body of the shock was the problem it was to long, the factory ones are very small in length and flat on the sides.

I called steve at tousley ford and has we all know the quads for our olders foxes are no longer made. he said the 1994-2004 quads are identical they just use a different part #. I ordered a pair they list for $39.98 he sells them for $26.39 +shipping they come with new nuts and bolts.

He was right they are the same shock!laid them next to each other no real difference, same body, rod length. they bolted right up and no rubbing, clear just fine :nice: .

some of you may know this already but I just wanted to pass this along since I see some guys asking about quads. If this is useful put in a sticky or in our parts info sticky if we have one.

here is the ford part# F8ZZ-4A263-AA
 
255/40-17's but it also could be the offset of the wheel giving me problems too. I'm running 93 cobra replica wheels, 9" they have a flush face to them and are pretty deep so I'm going with the offset issue . just thought I'd pass along the info, bloopbloob thanks for the help even though it didn't pan out.