• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

question about rocker arms

  • Thread starter Thread starter 2002BLGT
  • Start date Start date Jun 4, 2006
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Jun 4, 2006
#1
  • Jun 4, 2006
  • #1
I was just reading my muscle mustangs and fast fords and noticed one engine they were working on , it says the engine had 1.7 stock stamped steel rocker arms from a 460 engine and they are on a 5.0, so I check and local parts store has a set of these for 72 bucks for the set .....sounds like a cheap upgrade to me compared to paying 200 for roller 1.7s ......I know rollers will have less friction , but bottom line is a 1.7 is going to open the valve up more , I have a friend with a set of GT40 cast iron heads and he is running a E303 cam but was thinking about paying 200 for the roller 1.7s ......what do you guys think for 72 dollars would it be worth it to try and save some money ......?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 4, 2006
#2
  • Jun 4, 2006
  • #2
well i doubt the extra 130 bucks would buy you all that much hp. seems like a good idea to be. don't forget to check the valve to piston clearence. its not the overall lift that is the problem it has to do with duration.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Jun 7, 2006
#3
  • Jun 7, 2006
  • #3
86bluecobra said:
well i doubt the extra 130 bucks would buy you all that much hp. seems like a good idea to be. don't forget to check the valve to piston clearence. its not the overall lift that is the problem it has to do with duration.
Click to expand...

took a look at these last night , looks like they will bolt up with no issues what so ever , they are about 3/8s of an inch longer from from to back than the stockers ...and the valve tip on a stock one was actually riding out next do the edge and these it looks like the valve tip will be slightly to the inside of the flatest part of the area the valve tip contacts but overall I dont think it would ever cause any issues ........looks like a cheap upgrade especially for any speed density guys that can find a set of cast iron GT40s for cheap ....
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
D
First post 289 rebuild question!
  • Ddyer2868
  • Nov 24, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
367
Classic Mustang Specific Tech Dec 5, 2025
rednotch
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Timing not advancing/retarding
  • PonyGTrider
  • Aug 16, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
990
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 23, 2024
Noobz347
Engine 302 production block selection
  • FastDriver
  • May 19, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
48
Views
8K
Fox 5.0 Mustang Tech Jul 1, 2025
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?