• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Questionable Part

  • Thread starter Thread starter 1991RWHP
  • Start date Start date Jan 14, 2009

1991RWHP

New Member
Oct 8, 2008
59
0
0
Illinois
Jan 14, 2009
#1
  • Jan 14, 2009
  • #1
Was surfing around when i found a picture that confused me. Was just wondering what the part is called that is "circled" in red. Also what does it do(Kill 2 birds with 1 stone!)


Thanks for your help!
 

BLOWN347STROKER

Member
Jan 13, 2009
237
0
16
topeka kansas
Jan 14, 2009
#2
  • Jan 14, 2009
  • #2
Ford calls it an in line shock absorber. It is very expensive for that little part. Around 100.00 a piece for those little things from ford. They told me that they are there to prevent wheel hop. Hope that helps.
 

1991RWHP

New Member
Oct 8, 2008
59
0
0
Illinois
Jan 14, 2009
#3
  • Jan 14, 2009
  • #3
Is it actually useful? Anyone have an opinion on it?
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Jan 14, 2009
#4
  • Jan 14, 2009
  • #4
It's more commonly known as a 'Quad Shock' or the 'Quadra-shock rear suspension' as Ford calls it, it does keep the wheel hop down. A lot of people say that you can remove them with aftermarket control arms and be fine; others still experience wheel hop even with good control arms; its a crap shoot. Personally I think its best to try to keep them on either way if possible.

You can get them from Autozone for 25 bucks each, but you have to ask for them under 'steering damper' though.
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Jan 14, 2009
#5
  • Jan 14, 2009
  • #5
Junk them things
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jan 14, 2009
#6
  • Jan 14, 2009
  • #6
Yes they are useful. Leave them alone. Ford puts them on there for a reason. Even with good control arms, they should still be used.
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,061
3,133
204
Middle of Maine
Jan 14, 2009
#7
  • Jan 14, 2009
  • #7
I took them off of my car, more for tire clearance issues than anything else and saw no ill effects, but then again the suspension is hardly "stock" on my car. Plus you can drop a few pounds off of the car by removing them, if that matters to you.
 

1991RWHP

New Member
Oct 8, 2008
59
0
0
Illinois
Jan 14, 2009
#8
  • Jan 14, 2009
  • #8
Yea my car doesn't have them on there anymore, i saw a picture and was totally unaware of what they were or what they did. I don't really notice much wheel hop, but i guess there has been mixed feelings about them. Anyone elses input, please let me know!
 

squeak93

15 Year Member
Jun 2, 2005
2,351
417
164
Joplin, Missouri
Jan 15, 2009
#9
  • Jan 15, 2009
  • #9
U no longer need them if u have Aftermarket lca's. If ur susp is stock and u don't need to remove them for wheel/tire clearance, leave them on. That is if they are working correctly.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jan 15, 2009
#10
  • Jan 15, 2009
  • #10
I imagine that a good set of shocks along with the LCAs will also help avoid wheel hop if you remove the quads. My car still has all the original suspension and I get some wheel hop when I try to "power brake" a burnout.

But soon my car will NOT have stock suspension muoahahaha.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jan 15, 2009
#11
  • Jan 15, 2009
  • #11
When will this myth die?

There have been plenty of posts made by people with high dollar suspensions asking why they still have wheel hop. They toss the "useless" quads back on and suddenly it's all gone.

You can't issue a blanket statement saying quads aren't needed with aftermarket suspension components because there have been plenty of posts made by guys with aftermarker lca's and uca's who ditch the quads and still have it. Its a 2lb part and it works.

I still have quads on my car with MM lowers and Ford HD uppers.
 

Saleen8786

New Member
Oct 7, 2003
209
0
0
Marlton, NJ
Jan 15, 2009
#12
  • Jan 15, 2009
  • #12
they are usefull for a stock or lightly modded car, once you start really modding the car they are useless junk and dont prevent wheel hop as your hp and tq goes up, many ditch them for like said above wider tires,rims and after market control arms.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jan 15, 2009
#13
  • Jan 15, 2009
  • #13
squeak93 said:
U no longer need them if u have Aftermarket lca's.
Click to expand...

You read absolutely none of the responses above before posting this, did you?

Quad shocks are a good idea and do what they were intended for. If you've got aftermarket lowers, then try it without and see how it works. If it hops, put them back on. Simple as that.

....or, throw them away, then buy a new set when you realize the mistake you've made.
 

squeak93

15 Year Member
Jun 2, 2005
2,351
417
164
Joplin, Missouri
Jan 15, 2009
#14
  • Jan 15, 2009
  • #14
I read them all Gearbanger, not sure what ur getting at here. I was just posting my opinon on them and trying to support what has worked for me. Was I wrong in something. I went back and re read it all and don't see where I'm out of line. If I'm looking at somethign wrong, please let me know. I don't want to be giving somone false info by accident.

I have done it both ways. Had a 5 speed car with Hpm mega jrs and rear quads. No wheel hop.

92 aod with a 3500 stall and 351, lakewood traction action lca and bfg d/rs. No quads b/c of clearance issue and no wheel hop and great traction.
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Jan 15, 2009
#15
  • Jan 15, 2009
  • #15
Can't you simply install a set of mac's adjustable snubers and use adjustable upper control arms to change the pinion and add a little pre load to eliminate any left over hop from deleting the quad shocks?
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jan 15, 2009
#16
  • Jan 15, 2009
  • #16
squeak93 said:
I read them all Gearbanger, not sure what ur getting at here. I was just posting my opinon on them and trying to support what has worked for me. Was I wrong in something. I went back and re read it all and don't see where I'm out of line. If I'm looking at somethign wrong, please let me know. I don't want to be giving somone false info by accident.

I have done it both ways. Had a 5 speed car with Hpm mega jrs and rear quads. No wheel hop.

92 aod with a 3500 stall and 351, lakewood traction action lca and bfg d/rs. No quads b/c of clearance issue and no wheel hop and great traction.
Click to expand...

I'm not saying you were wrong....if it worked for you, then that's great. Your statement just sounded so "matter of factly" and dismissive to alternate opinions to aftermarket lower control arms that I thought I should address it. Not everyone has been as lucky as yourself. Lower control arms that experience less flex and that have harder durometer bushing will certainly help the situation and like I said it a good portion of the cases will cure the issue, but the only thing that really seems to eliminate the wheel hop altogether is the factory quad shocks.

Either way, my comment was meant to be a little more light hearted....hence the " "
 

squeak93

15 Year Member
Jun 2, 2005
2,351
417
164
Joplin, Missouri
Jan 15, 2009
#17
  • Jan 15, 2009
  • #17
Thats cool Gearbanger. I was just throwing my .02s. I been through a few diff rear set ups between my own cars and wrenching on close friends. I guess we have all been fairly lucky as u say. Could just be our local track, none of us really exp any wheel hop and all the said cars were 12-11 sec ones. So yea. For the op, there are many ways to do it, Quads work best when on a budget but u can get into fully adjustable susp pieces for quite a bit of cash and make it work brillantly for u.
 
R

rednotch88

Member
Sep 6, 2008
151
0
16
CHICAGO
Jan 15, 2009
#18
  • Jan 15, 2009
  • #18
When removed for larger tires I had wheel hop like a son a bitc* through them back on.was horrible without them unless you going with some drag slicks but with 17's forget about it.
 

Saleen8786

New Member
Oct 7, 2003
209
0
0
Marlton, NJ
Jan 15, 2009
#19
  • Jan 15, 2009
  • #19
^^^not if you have the right control arms and set the pinion angle,theres tons of people out there running 17's and 18's on fox's with no quad shocks and NO WHEEL HOP.
 
You must log in or register to reply here.

Similar threads

Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
166
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
316
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
290
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
268
SN95 V6 Mustang Tech May 23, 2026
DPP
D
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
404
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?