• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Questions

  • Thread starter Thread starter 95YellowGTbeasT
  • Start date Start date May 14, 2004

95YellowGTbeasT

New Member
Mar 4, 2003
605
1
0
South Carolina
May 14, 2004
#1
  • May 14, 2004
  • #1
I ran several times last night at my local drag strip with my new mods and my best time was a 9.3. since they didnt hand out time slips i dont know my 60ft or reaction time.

Should i be running better times with my mod that i have ??
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
May 14, 2004
#2
  • May 14, 2004
  • #2
Depending on your 60's, I'd say yes, you should be running better. I ran 8.8's in the 1/8th at 78mph with an edelbrock intake, 65mm t-body, headers, x pipe, mufflers, pulleys, homemade CAI, 3.73's and nitto DR's with a 1.91 60' I've never heard of a place that doesn't give you time slips or 60' etc... why go if they don't give you the stuff needed to test and tune your car???
 

95YellowGTbeasT

New Member
Mar 4, 2003
605
1
0
South Carolina
May 14, 2004
#3
  • May 14, 2004
  • #3
i went with my friends to this track it was out of state and i have never been there b4 i assumed they would give out slips but i learned not to assume stuff now.



Nick
 

GTJake

Founding Member
Oct 28, 2002
3,049
0
56
Ann Arbor, MI
May 14, 2004
#4
  • May 14, 2004
  • #4
Have you had the car tuned? What was the trap speed?

Jake
 

95YellowGTbeasT

New Member
Mar 4, 2003
605
1
0
South Carolina
May 14, 2004
#5
  • May 14, 2004
  • #5
My car hasnt been tuned and the trap speeds were 80-85.



Nick
 

GTJake

Founding Member
Oct 28, 2002
3,049
0
56
Ann Arbor, MI
May 14, 2004
#6
  • May 14, 2004
  • #6
If they were around 85mph then you're right where you should be. Take it to a real 1/4 track and get some sticky tires (i.e SLICKS)! You should be able to hit 12's.

Jake
 

95YellowGTbeasT

New Member
Mar 4, 2003
605
1
0
South Carolina
May 14, 2004
#7
  • May 14, 2004
  • #7
killer ran an 8.8 at 72???
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
May 15, 2004
#8
  • May 15, 2004
  • #8
95YellowGTbeasT said:
killer ran an 8.8 at 72???
Click to expand...


I ran 8.8 at 78mph with the stock heads and cam. I now run 7.8-7.9 at 85-87 in the 1/8th with my current combo, and that's even on DR's. A few more MPH and I will be trapping the same in the 1/8th as I did in the 1/4 stock. I ran 90mph bone stock in the 1/4.
 
You must log in or register to reply here.

Similar threads

A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
257
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
A
A/F ratio gauge install questions.
  • AngryH58
  • Sep 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
220
1996 - 2004 SN95 Mustang -General/Talk- Oct 22, 2026
Noobz347
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
608
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
S
Mach 1 iac valve in a 4.6 gt
  • solodriverz
  • Jun 3, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
159
SN95 4.6L Mustang Tech Jun 5, 2026
squeak93
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?