Damn mine didnt come with those. I wonder what I could fab up to work like that.urban96 said:mine had some push pin type things that got pushed down into where the stock airbox was held into place
Yeah, he's talking about the grommets........two pieces of metal with thread that push down into the rubber and it should have a place where you take you original bolt that goes into the fender well............I ended up taking the saw and running mine straight behind the headlight.....the new MAF was longer and bunched up the rubber connector's and was causing a little problem...........so I broke out the Dewalt...The Green GT said:Damn mine didnt come with those. I wonder what I could fab up to work like that.
Yea, I got the top bolt on, but thats it lol.drakesdad said:Yeah, he's talking about the grommets........two pieces of metal with thread that push down into the rubber and it should have a place where you take you original bolt that goes into the fender well............I ended up taking the saw and running mine straight behind the headlight.....the new MAF was longer and bunched up the rubber connector's and was causing a little problem...........so I broke out the Dewalt...
LOL.......I don't even have that anymore.............When I get around to it I think I'll buy another CAI kit and take it back into the fender............or maybe I'll do like most people and take the headlight out at the track........or not.........The Green GT said:Yea, I got the top bolt on, but thats it lol.
Hey let me get those snaps if you dont need them.drakesdad said:LOL.......I don't even have that anymore.............When I get around to it I think I'll buy another CAI kit and take it back into the fender............or maybe I'll do like most people and take the headlight out at the track........or not.........
JT>>>>>>>>send me a pm with your address.......Eric does not need the plate......I will send it to you brother......HISSIN50 said:Mine didnt come with that plate. I thought about making one but it seemed a pain. I use 'stuff' to fill around the inlet hole in the fender. It would look SO much nicer to have a plate though.
If you go to the hardware store, take a look at Well nuts - that might be similar to what Will is talkin about (I havent seen the actual fasteners these CAI's come with, so I might be way off base). Well nuts are used to secure roof racks to cars and stuff like that.
Good luck.
Why thank you kind-sir. Pm sent.drakesdad said:JT>>>>>>>>send me a pm with your address.......Eric does not need the plate......I will send it to you brother......
The Green GT said:Hey let me get those snaps if you dont need them.
And thats rediculous when ppl take out a headlight. You couldnt pay me to take mine out after all the trouble I had installing them.
I didn't have that screw for the stock airbox either. Wonder what thread it is. I am not running the plate right now either. Mainly because I just threw mine on last night.
So it was supposed to come with a couple plastic push in things? I'll have to go hunt some down at advance tomorrow after work. Might try to find the right size bolt for that top piece also.
I have an extra plate I probably give away also. I got one of these CAI's for free when I bought some parts. It was in good shape but someone had cut the flange for the MAF off so I just ordered another one.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?