Quick Anwer Please: I dont really need to install diveshaft safety loop right?

trublustallion · May 31, 2004

Ima go under the car to see whats up with a noise I been hearing down there lately. But while im already down there, i wanna install the alum. DS ive had in my room for a while. So my question here is....
Do i really need to install a loop? I dont have one yet, but dont have money for one now. And my car is pretty much stock with an auto tranny, so i dont see why it should break, besides, its supposedly stronger than the stock one.

Install without, yes or no?

MT1083 · May 31, 2004

You can install the loop at a later date without having to remove the DS. Thats what I did on mine.

trublustallion · May 31, 2004

MT1083 said:
You can install the loop at a later date without having to remove the DS. Thats what I did on mine.

cool, i just wanted to make sure

thanks

Acer2428 · May 31, 2004

Where did you find an alum. DS for an auto? And what year is your stang?

Dark Knight GT · May 31, 2004

Acer2428 said:
Where did you find an alum. DS for an auto? And what year is your stang?

You can buy one meant for a five speed and just swap tranny yokes. Also, I highly recommend putting in the driveshaft safety loop when you put in a driveshaft.

just some guy · May 31, 2004

you should really install that even if you dont have an al. driveshaft. imagine you are going down the quarter mile and you shift and snap that front yoke. your car then catapults itself down the rest of the track....

just something to think about

twogts4us · May 31, 2004

just some guy said:
you should really install that even if you dont have an al. driveshaft. imagine you are going down the quarter mile and you shift and snap that front yoke. your car then catapults itself down the rest of the track....

just something to think about

I'm not trying to flame or nothing, but I don't see one listed on your mods...? Just curious. I think we all know what can happen if the front yoke snaps...

pony_vert02 · May 31, 2004

exactly what does the safety loop do??

twogts4us · May 31, 2004

pony_vert02 said:
exactly what does the safety loop do??

Loops around the driveshaft, near the transmission, to prevent the catapult effect if the front yoke snaps and the driveshaft becomes no longer attached to the transmission, therefore possibly acting as a pole vault and violently throwing the rear of the car up in the air.
Regarding my post above, I guess I was wrong in thinking everyone knew what happens if the front of the DS disconnects from the trannie at speed...my bad.

just some guy · May 31, 2004

twogts4us said:
I'm not trying to flame or nothing, but I don't see one listed on your mods...? Just curious. I think we all know what can happen if the front yoke snaps...

i wasnt trying to act smart or anything...sorry if i came off sounding like...whatever...

some people dont realize how important they are so i was just trying to explain what may happen without one.

i dont have one, but i am getting one before i start racing again in october.

twogts4us · May 31, 2004

just some guy said:
i wasnt trying to act smart or anything...sorry if i came off sounding like...whatever...

some people dont realize how important they are so i was just trying to explain what may happen without one.

i dont have one, but i am getting one before i start racing again in october.

'Tis cool, bro - and, again, I really wasn't trying to be a d1ck about it.

Hat's off to anyone pulling it up to the tree and running it like they hate it. And big time props to anyone doing anything about safety - both on and off the track. I'm still amazed at people who don't wear seatbelts. One day we'll find them underneath the dash in a rather ackward and painful position.

trublustallion · Jun 1, 2004

Acer2428 said:
Where did you find an alum. DS for an auto? And what year is your stang?

I did what Dark Knight Gt said. I bought the manual version frpp ds and swapped the yokes. my stang is a 2001 and the install went very well. i got it from mustangtuning.com for like 140 but DAMN they went up to 220+!!!! (something like that). i'de say i got a good deal.
as far as the safety loop, i WILL be installing one later on, but wanted to know if i could install w/o it now.

Quick Anwer Please: I dont really need to install diveshaft safety loop right?

trublustallion

MT1083

New Member

trublustallion

Acer2428

New Member

Dark Knight GT

I can't get it up......ok that didn't sound right.

just some guy

twogts4us

pony_vert02

New Member

twogts4us

just some guy

twogts4us

trublustallion

Similar threads

Quick Anwer Please: I dont really need to install diveshaft safety loop right?

New Member

New Member

I can't get it up......ok that didn't sound right.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency