• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

quick head question

  • Thread starter Thread starter stang1986GT
  • Start date Start date Nov 25, 2007

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Nov 25, 2007
#1
  • Nov 25, 2007
  • #1
Can I put the newer wedge style heads on my 86 with speed density without converting to mass air? A friend has a good set of wedge heads, but I can't go to the expense of converting right now. Also, will I have valve to piston clearance problems?

Sorry, not very experienced with this engine. Thanks.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Nov 25, 2007
#2
  • Nov 25, 2007
  • #2
I assume you are talking about E7;s? Yes you can. 87-88 speed density mustangs run that head.


Piston to valve clearance might be an issue though as the '86 pistons don't have valve reliefs cut into them. With a stock cam i think you will be fine
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Nov 25, 2007
#3
  • Nov 25, 2007
  • #3
I thought 87 and 88's were mass air? When did Ford start using mass air?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Nov 25, 2007
#4
  • Nov 25, 2007
  • #4
1989 was the first year in all 50 states

in 1988 it was in california only
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Nov 25, 2007
#5
  • Nov 25, 2007
  • #5
Ok, thanks. How can I know for sure on the valve clearance?
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Nov 25, 2007
#6
  • Nov 25, 2007
  • #6
If you are talking about E7 heads on a non-valve reliefed '86 block, some clear with a stock cam and others do not. Piston to valve clearance will have to measured.

If you are talking about Trickflow's Twisted Wedge heads, you are likely to have contact.

Yep, Mustang5L5 is right.

1988 for the California cars and 1989-1993 for the maf on the foxbodies.
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Nov 25, 2007
#7
  • Nov 25, 2007
  • #7
Yea, talking about the E7 heads.

Thanks again!
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Nov 25, 2007
#8
  • Nov 25, 2007
  • #8
Find an E7 upper intake, EGR and TB assembly and swap those on at the same time as well. Cheap and easy to find
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Nov 25, 2007
#9
  • Nov 25, 2007
  • #9
Thanks for the advice!
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Nov 25, 2007
#10
  • Nov 25, 2007
  • #10
This can help you check piston to valve clearance

http://www.fordmuscle.com/fundamentals/pistontovalve/
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
726
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Engine Forged flat top pistons from 5.0 fit a 351 build?
  • PonyGTrider
  • May 22, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
2K
Fox 5.0 Mustang Tech Feb 1, 2026
PonyGTrider
Fox Xtremely high fuel consumption
  • PonyGTrider
  • Apr 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
213
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
PonyGTrider
My next project , a 428 build!
  • horse sence
  • Jul 29, 2026
  • Classic Mustang Specific Tech
  • 9 10 11
Replies
215
Views
5K
Classic Mustang Specific Tech Yesterday at 1:24 PM
horse sence
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
849
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?