quick head question

Can I put the newer wedge style heads on my 86 with speed density without converting to mass air? A friend has a good set of wedge heads, but I can't go to the expense of converting right now. Also, will I have valve to piston clearance problems?

Sorry, not very experienced with this engine. Thanks.
 
I assume you are talking about E7;s? Yes you can. 87-88 speed density mustangs run that head.


Piston to valve clearance might be an issue though as the '86 pistons don't have valve reliefs cut into them. With a stock cam i think you will be fine
 
If you are talking about E7 heads on a non-valve reliefed '86 block, some clear with a stock cam and others do not. Piston to valve clearance will have to measured.

If you are talking about Trickflow's Twisted Wedge heads, you are likely to have contact.

Yep, Mustang5L5 is right.

1988 for the California cars and 1989-1993 for the maf on the foxbodies.