I'm about to bid on some injectors and a maf. my motor has stock heads and intake but a f303 cam and eventually i'll be getting the heads and intake. should i even mess with injectors
You could begin to run rich by dumping to much fuel unless you buy a fprr to lean it out some. How the hell did you get the f cam to idle in your car? Most 94/95 computers start to have seizures when a large cam is intoduces. Also on a pretty much stock car that cam is way to big and is not doing much to help your car out in performance.
An intake is a good upgrade the lower intakes on our cars are very restrictive. You can find a used cobra, edelbrock performer(not rpm to much for a mostly stock car) on ebay or in the classified section here. Have you done any exhaust mods like an off road h or x or prochamber(<--makes the most hp out of all of them) mide pipe? It makes no sense to start letting alot of air in if you can't let it out.