Here is how I silenced my Triax:
Tools needed:
1. Electrical Tape
2. Teflon Tape
3. 1ft of Dynamat (or alternative)
Procedure:
1. remove shift knob and shift handle.
2. remove that rubber insulator POS. (dont need it)
3. wrap electrical tape around the shifter shaft.
4. wrap electrical tape around the shifter handle.
5. Poke holes thru the tape where the handle & shaft bolts together.
6. Attatch handle to shaft.
7. wrap electrical tape around the connected area.
8. wrap teflon tape around handle threads before attatching shifter knob.
9. lay down fatmat stuff all around base of shifter.
10. That's it! No more rubber insulator POS and purre silence
Tools needed:
1. Electrical Tape
2. Teflon Tape
3. 1ft of Dynamat (or alternative)
Procedure:
1. remove shift knob and shift handle.
2. remove that rubber insulator POS. (dont need it)
3. wrap electrical tape around the shifter shaft.
4. wrap electrical tape around the shifter handle.
5. Poke holes thru the tape where the handle & shaft bolts together.
6. Attatch handle to shaft.
7. wrap electrical tape around the connected area.
8. wrap teflon tape around handle threads before attatching shifter knob.
9. lay down fatmat stuff all around base of shifter.
10. That's it! No more rubber insulator POS and purre silence