• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Ramchargers Dual Fan still exists?

  • Thread starter Thread starter Treachery
  • Start date Start date Apr 13, 2006
  • 1
  • 2
Next
1 of 2 Next Last
T

Treachery

Founding Member
Jun 9, 2002
148
0
17
Apr 13, 2006
#1
  • Apr 13, 2006
  • #1
Does the company that make the Ramcharger Dual Fan still exist?

Having problems access their website - www.ramchargers.com

If they are no longer is business, what fan would be a good replacement?

I have a Vortech supercharger in my '93 GT and space quite limited as you can imagine.

Thanks.
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Apr 13, 2006
#2
  • Apr 13, 2006
  • #2
Ramchargers is dead in the Detroit area. They sold it to Livernoismotorsports. Give them a call, they took over all of their cleints and products.
www.livernoismotorsports.com
 
J

jwcma

Founding Member
Aug 5, 2002
70
0
6
Bay Area, CA
Apr 13, 2006
#3
  • Apr 13, 2006
  • #3
They are still being sold by a Monte Carlo website. Someone posted the info (maybe on Corral) not too long ago.
 
T

Treachery

Founding Member
Jun 9, 2002
148
0
17
Apr 14, 2006
#4
  • Apr 14, 2006
  • #4
Checked the new website... The ramcharger dual fan is nowhere to be found...

SO...

My Ramcharger dual fan is broke. It worked wonderfully and kept my Vortech'ed engine cool. I figured getting the same for compatibility sake. My knowledge of fans is rusty for i hadn't had to deal with is this issue in years.

What now would be a good choice of fan (except the Mark IV or VI)? Space in my engine is limited due to the s/c.

Flex-a-lites appear to be popular but last i checked, they didn't perform like Ramcharger did. How about SPAL? I need the slimline design.
 
J

jwcma

Founding Member
Aug 5, 2002
70
0
6
Bay Area, CA
Apr 14, 2006
#5
  • Apr 14, 2006
  • #5
check the Monte Carlo website:

http://www.montecarloss.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=20;t=000046;p=0
 
B

blue302stang

New Member
Jan 23, 2006
61
0
0
Apr 14, 2006
#6
  • Apr 14, 2006
  • #6
you can get more cooling out of a DCC fan kit.
 
L

lincscbb86

New Member
Jan 2, 2005
17
0
0
Apr 14, 2006
#7
  • Apr 14, 2006
  • #7
I have the ramchargers fan with the DCC control. Works real good. The ramchargers fan is easy on the checkbook too.
 
T

Treachery

Founding Member
Jun 9, 2002
148
0
17
Apr 17, 2006
#8
  • Apr 17, 2006
  • #8
Thanks a lot JWCMA! I'll be placing an order in the morning.

Yes... The Ramchargers dual-fan is great though i think the bearings in mine has worn out. Both fans are loose... you can actually wiggle them. When the fans are on, they vibrate like there's no end. Cooling is definitely affected.
 
J

jwcma

Founding Member
Aug 5, 2002
70
0
6
Bay Area, CA
Apr 17, 2006
#9
  • Apr 17, 2006
  • #9
No problem. Do you have any idea why the bearings went bad? How much use have you gotten out of them? Are they always on or do you use a switch of some kind?

I finally installed my new Fluidyne radiator & Ramchargers fan combo, although the fan isn't wired yet. The motor stayed right around thermostat temp (180*) as long as the car was moving. Stop signs weren't a problem, but it got up to high 180's if I stopped at a light for more than 30 seconds. I have a feeling the fans' low speed setting will be plenty to keep it cool.
 
T

Treachery

Founding Member
Jun 9, 2002
148
0
17
Apr 17, 2006
#10
  • Apr 17, 2006
  • #10
JWCMA,

I only got about 2.5 - 3 years out the fan but it performed so well that i'm willing to get the same. I, too, have a Fluidyne radiator and i had to cut the mounting bars that sticks out from the side so that they are flush with the fans. No big deal.

I first had it wired so that i can turn the fans on manually. But after a ton of times of forgetting to turn them on (engine overheating) AND forgetting to turn them off (dead battery), i had it wired so that the "low" setting will always be on. I can go to the "high" setting manually via the switch.

The only times that i ever used the "high" setting was when i would forget to turn on the fan; the temperature gauge on the red! It's good to have that option, especially when it's a hot day.

I would wire yours the same I have mine - "Low" setting is on all the time while I have the option to use the "high" settings via the switch.

I'm not sure why the bearings went out after only a few years. At first, the fans would squeek but after a while they started to vibrate. I did nothing to them in terms of maintenance, however. Maybe i should oil my new fan every now and then?

I placed my order, this morning. The company that sells them appear to be prompt. I should receive my new fan in 3 days.

http://shop.smmenterprises.com/index.asp?PageAction=VIEWPROD&ProdID=187489

I got the fan without the wiring harness. If the design is indeed the same as the Ramcharger, I can transfer the old harness over to the new unit.
 

7-UP BILL

Founding Member
Jan 4, 2001
885
19
49
My other car is a Firetruck
Apr 17, 2006
#11
  • Apr 17, 2006
  • #11
The Ramchargers fan is from a Chrysler 300M. The front wheel drive car they made a few years back. Wrecking yard trip anyone?
 
J

jwcma

Founding Member
Aug 5, 2002
70
0
6
Bay Area, CA
Apr 17, 2006
#12
  • Apr 17, 2006
  • #12
Treachery, I can't wait to get the fan wired up. If I have the wiring figured out correctly, I will hook up the low speed to my digital temp control gauge. It's nice because I can set the turn-on temp to whatever I like, in one degree increments. I believe it turns off after reaching 3 degrees below the set temp.

Then, I plan on using a modded defrost switch (car didn't come with defrost) to either turn on the low speed (when set temp has not been reached yet) or high speed (if temp controller is already on).

Driving around for the first time without a belt fan was awesome. It felt like the throttle was reading your mind. I didn't think the throttle response could get any better, but it did!! It was also nice to be able to pop the hood with the motor running and hearing things I could never heard before, like the ps pump.

7-UP, thanks for the info. I bought the fan w/o the expensive harness, so I'd like to score the plug that fits the fan so I can remove it w/o cutting anything. Just last night, I figured out how to disassemble the plug so I could use spade terminals in case I can't find a 300m.
 
T

Treachery

Founding Member
Jun 9, 2002
148
0
17
Apr 20, 2006
#13
  • Apr 20, 2006
  • #13
Still waiting for the fan... It will arrive tomorrow. God! Why can't DHL be any faster!

It finally stopped raining in the Bay Area and my Mustang is grounded with no fan!

Arrrgh!
 

mustangdaren

Founding Member
Apr 21, 2002
605
0
0
Hildebran, North Carolina
Apr 24, 2006
#14
  • Apr 24, 2006
  • #14
Do a search on 2001 dodge intrepid electric fan. The exact same fan as ramchargers comes up. Cost a little more though, around $145. I just switch to a Holcomb Motorsports dual 12 inch spal fan with aluminum shroud. Puts out about what the Ramchargers I had did no low. The fit is perfect though with no modifications needed.
 

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
Apr 24, 2006
#15
  • Apr 24, 2006
  • #15
are you guys running these fans with stock alternators? if so do you have any charging issues? i want to do electric fans but i want to keep the stock alternator as long as i can... the only accesories i am running is a few guages and an external fuel pump, no subs or amps or any of that nonsense
 

mustangdaren

Founding Member
Apr 21, 2002
605
0
0
Hildebran, North Carolina
Apr 24, 2006
#16
  • Apr 24, 2006
  • #16
I'm running a 3g alternator with PA Performance wire upgrade. I would suggest that you upgrade the alternator before getting an electric fan.
 
J

jaredgoodwin

New Member
Sep 29, 2004
62
0
0
Apr 24, 2006
#17
  • Apr 24, 2006
  • #17
Stock alternator with ramchargers fan here. DCC is the key...
 
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Apr 24, 2006
#18
  • Apr 24, 2006
  • #18
DCC controller?

jaredgoodwin said:
Stock alternator with ramchargers fan here. DCC is the key...
Click to expand...
Where can I purchase the DCC?
 
T

Treachery

Founding Member
Jun 9, 2002
148
0
17
Apr 25, 2006
#19
  • Apr 25, 2006
  • #19
The fan arrives and it's indeed the Ramchargers fan. Installation was a matter of plug and play, for me.

I already have a Powermaster alternator (the Black model). I think it puts out 140A.. i could be mistaken.. BUT i do "feel" that my Mustang needs more power.. The car seems to feel weak during start ups, even when already warm.. especially during cold starts. I have to rev the engine at around 3000rpm for about a minute or else the motor will die. I had the car re-grounded a few months ago.

As for the DCC, i don't think it's necessary for my setup. The fan MUST be on at all times... even during it idle on a cold day. Heat from the s/c, i suppose.

I could be mistaken, of course.
 
J

jwcma

Founding Member
Aug 5, 2002
70
0
6
Bay Area, CA
Apr 26, 2006
#20
  • Apr 26, 2006
  • #20
Treachery, could you explain how the high/low speed wiring is laid out for this fan? I just installed mine but I could only get one speed to work. I have one relay connected to the green wire, another relay going to the yellow wire. Both black wires are tied to ground. Either relay will turn on the fan. I thought one relay (either one) by itself would turn on the low speed, and both relays would be high speed. However, when both relays are on, the speed of the fan is no different than with a single relay.

The fan cools great BTW. I just wish I could get both speeds to work, to make all that wiring I did worthwhile.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

G
1991 GT 5.0 running hot
  • gvanginkel403
  • Jul 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
152
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2026
General karthief
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
81
The Welcome Wagon Jul 3, 2026
5150K
5
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
572
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
829
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
517
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?