Random Mustang II Pictures

2Blue2 · Sep 9, 2023

00-1974-Mustang-II-from-sketch-to-production-720x540.webp

2Blue2 · Sep 9, 2023

2Blue2 · Sep 9, 2023

79PaceKar · Sep 11, 2023

Lots going on with my Yellow Mustang. Hope to have the engine running this week then finishing the wiring and interior before cold weather sets in. Regarding my t-top. Taking my parts car to welding shop in the morning, 12th, to have braces welded in the engine compartment. then will be cutting the front core support and inner fenders on both sides off. Then swapping the rear ends as the parts car has an 8 inch rear end. T-top was a 4 cyl so has the smaller rear end. Also found the parts car, a 75 Ghia, appears to have the AUX gas tank. Will do more looking next week. Took the air shocks off yesterday. They held 30 psi for a couple of weeks so they are good.

79PaceKar · Sep 11, 2023

Regarding my T-Top. I will be ordering a Monroe Handler body kit next week. Considering do some "not so Handler" stuff to it. First paint will be either Lazor Red or Triple Black. I know a big swing in color. AND really thinking about putting a King Cobra decal kit on. I like both styles, but it seems most Handler look the same. Want to stand out. Besides there is a 2019 Black Mustang with flaired wheel opening driving around and it sure does look good. Still looking for an oil pan. Latter

Blackhawkxx · Sep 12, 2023

Back in the day. Still had the 13" wheels on it, still have those wheels sitting in the garage.

Noobz347 · Sep 12, 2023

79PaceKar said:
Lots going on with my Yellow Mustang. Hope to have the engine running this week then finishing the wiring and interior before cold weather sets in. Regarding my t-top. Taking my parts car to welding shop in the morning, 12th, to have braces welded in the engine compartment. then will be cutting the front core support and inner fenders on both sides off. Then swapping the rear ends as the parts car has an 8 inch rear end. T-top was a 4 cyl so has the smaller rear end. Also found the parts car, a 75 Ghia, appears to have the AUX gas tank. Will do more looking next week. Took the air shocks off yesterday. They held 30 psi for a couple of weeks so they are good.

79PaceKar said:
Regarding my T-Top. I will be ordering a Monroe Handler body kit next week. Considering do some "not so Handler" stuff to it. First paint will be either Lazor Red or Triple Black. I know a big swing in color. AND really thinking about putting a King Cobra decal kit on. I like both styles, but it seems most Handler look the same. Want to stand out. Besides there is a 2019 Black Mustang with flaired wheel opening driving around and it sure does look good. Still looking for an oil pan. Latter

Thou hast committed two mortal Stangnet Sins :O_o:

Second: Blah blah about your car in [not] your thread.
First: Not a single image of a Mustang 2. :nonono:

Say three

"Hail Mustangs!" :hail:

and start your own thread. :jester:

Also: You need one of these:

You'll have to struggle with the whole "i before e except after c..." thing on your own.

2Blue2 · Sep 12, 2023

Oh I want one of those!

2Blue2 · Sep 12, 2023

Blackhawkxx said:
Back in the day. Still had the 13" wheels on it

Looks good in that pic.

I bought a set of original Lacy Spoke wheels.
I think option included were Mag 5 hole slots, Lacy Spoke, Magnum 400, and Hubcaps
They were cheap.
Still not sure I want 13 inch on Our Cobra.
Got to be hard to find Non trailer tires to fit, right?

Didn’t even wipe the dust off for this pic sorry.

13 inch 5 hole slot Mags,..........................................................Magnum400 (not sure thats the right names)

Was the spare with car, but car came with set of 4 from under the house that were crumbling both tires and rims

If I was to do it, I always imagine going instead with the aftermarket “Appliance" rims that are similar.
(used from flea buy)
Here shown in 14inch............................and ...........................15

Noobz347 · Sep 12, 2023

Reminds me of the Snowflake wheels on the TransAm.

Blackhawkxx · Sep 12, 2023

2Blue2 said:
Looks good in that pic.

I bought a set of original Lacy Spoke wheels.
I think option included were Mag 5 hole slots, Lacy Spoke, Magnum 400, and Hubcaps
They were cheap.
Still not sure I want 13 inch on Our Cobra.
Got to be hard to find Non trailer tires to fit, right?

Didn’t even wipe the dust off for this pic sorry.

13 inch 5 hole slot Mags,..........................................................Magnum400 (not sure thats the right names)

Was the spare with car, but car came with set of 4 from under the house that were crumbling both tires and rims

If I was to do it, I always imagine going instead with the aftermarket “Appliance" rims that are similar.
(used from flea buy)
Here shown in 14inch............................and ...........................15

I also still have the factory wheels with the centers and rings like the ones you shown but they are still in good condition.

Blackhawkxx · Sep 12, 2023

2Blue2 said:
Still not sure I want 13 inch on Our Cobra.
Got to be hard to find Non trailer tires to fit, right?

2Blue2 · Sep 13, 2023

Well thats a pretty good selection, now with the shipping to Hawaii it,....well doesn’t exist.
can get it the round about way but with shipping it breaking 400$ a tire

Blackhawkxx · Sep 13, 2023

2Blue2 said:
Well thats a pretty good selection, now with the shipping to Hawaii it,....well doesn’t exist.
can get it the round about way but with shipping it breaking 400$ a tire

I didn't realize that you were in Hawaii. I guess shipping is high on many things. I also wonder how many Mustang IIs are on the islands?

Enzio · Oct 5, 2023

2Blue2 said:
Yeah, his is looking Good!

Sorry I've been absent this past summer. Moved from Murderapolis to the far northern part of Minnesota. I was exhausted but there was a huge bass fishing contest in town and they had a small car show...over 100 really cool cars. It was a fun day to take a break from the moving stuff. Thank you for the compliments.