Rattling from pro 5.0 under acceleration

Milenko

Skid Mark Layer...only not fro
Founding Member
Nov 5, 2001
462
1
19
Boston, MA
Only happens under hard acceleration, but the noise is starting to get to me. I bought the car with the pro 5.0 already installed, so I haven't taken it apart yet.

Is there anything specific I should look for/tighten when I take it apart?
 
Milenko said:
Only happens under hard acceleration, but the noise is starting to get to me. I bought the car with the pro 5.0 already installed, so I haven't taken it apart yet.

Is there anything specific I should look for/tighten when I take it apart?
Does it sound like pre detonation? Try using high octane fuel and see if it goes away. If you allready are, try backing your timing off a bit.
 
dsg_gt2004 said:
i dont see what would be causing detontation..i would suggest looking at the safety stop screws are any parts like that , which could possible come loose...hopefully its just the shifter
Oops!! Just reread the thread, my mistake. :doh:
 
Mine does it also..due to the lack of bushings where the handle screws to the shifter base.It picks up vibrations like a mf.
The factory bushings can be used or call Pro50.They will advise. I like the way it shifts..so I'm leaving it alone.But it is correctable.HTH