Ready to burn it

DJTR

Member

Mar 19, 2004

228

0

16

OTTAWA, Ontario, Canada

Aug 13, 2004

#1

• Aug 13, 2004

• #1

I know this is a very bad time to be posting a thread but I really really need to vent. The 306 that I had been building for a very long time now ended in some problems.

number 1 the heads where rebuilt ported polished ect. well it had a defective valve and destroyed the head.

number 2 I finaly get a replacement head my mechanic was putting it on cause I didn't have time. so earlier today I get a phone call and I hear it running! It sounded GREAT!! he shuts it off gets changed hops back in it to drive it to me and as he's pulling out of the driveway he hears the motor falling apart and it seizes up solid.

I honestly don't know what to do anymore I need a car! My daily driver is dead and now this thing BLOWS UP ON ME after I dump a pile of money into it. I know I'll probably just go get another motor but honestly a can of gas and a match are sounding really really good right now.

 

MadMatt5oh

Member

Jan 10, 2003

441

0

16

St Paul, MN

Aug 13, 2004

#2

• Aug 13, 2004

• #2

Sounds like you have a moron for a mechanic. Its a shame you trusted him

 

bluevenom867

I will have images of molesting stuffed animals in

Dec 15, 2003

1,704

1

0

St.Petersburg,FL

Aug 13, 2004

#3

• Aug 13, 2004

• #3

Damn man,that sucks for you.
Are you sure it's not the
Block Plate/Tranny?
I had a problem when starting my motor for the first time.I had a new C4 and Torque converter on a new SFI Flex Plate,but I still had a old 302 T5 block plate.I got it started and ran for a moment and was making a terible sound.It was so bad I had to turn it off.I tried to start it again but it was solid,reason:A torque convert bolt got stuck on the block plate.
Hope you figure it out.

 

DJTR

Member

Mar 19, 2004

228

0

16

OTTAWA, Ontario, Canada

Aug 13, 2004

#4

• Aug 13, 2004

• #4

Considering he used to work for AC Cobra Reproductions and has built more than you can dream of and he's also a registered class A mechanic, I really don't think you have grounds to say that. So keep your un-called for negative comments to yourself because trust me they weren't asked for! A guy has a ***** day and ***** luck with his car and all you can do is come up with negative to say? You really need to get a life and grow up!

 

DJTR

Member

Mar 19, 2004

228

0

16

OTTAWA, Ontario, Canada

Aug 13, 2004

#5

• Aug 13, 2004

• #5

bluevenom867 said:

Damn man,that sucks for you.
Are you sure it's not the
Block Plate/Tranny?
I had a problem when starting my motor for the first time.I had a new C4 and Torque converter on a new SFI Flex Plate,but I still had a old 302 T5 block plate.I got it started and ran for a moment and was making a terible sound.It was so bad I had to turn it off.I tried to start it again but it was solid,reason:A torque convert bolt got stuck on the block plate.
Hope you figure it out.

Click to expand...

I haven't had a chance to check it out cause I'm stuck at work right now but thanks for the ideas! I'll check it out..... its a c4 with an aod block plate on it right now I think it was running perfectly until it hit load and then it just grenaded I'm gonna tear it all apart and start checking things tho. thanks for the advise rather than the flame I already got

 

MadMatt5oh

Member

Jan 10, 2003

441

0

16

St Paul, MN

Aug 13, 2004

#6

• Aug 13, 2004

• #6

wow, are you offended! Well excuUUUse me! I realize my comments werent helpful but maybe you should ask your mechanic what happened. Im just expressing my useless opinion. Forgive me

 

MadMatt5oh

Member

Jan 10, 2003

441

0

16

St Paul, MN

Aug 13, 2004

#7

• Aug 13, 2004

• #7

I felt you were taken advantage of. Similiar stories are common. Excuse me

 

DJTR

Member

Mar 19, 2004

228

0

16

OTTAWA, Ontario, Canada

Aug 13, 2004

#8

• Aug 13, 2004

• #8

sorry for snapping just having a really really bad day, little on edge.

 

79'293stang

Active Member

Jan 5, 2003

505

11

29

Cedar Rapids, Iowa

Aug 13, 2004

#9

• Aug 13, 2004

• #9

dont feel bad i just got my brand new motor runnin after dumping tons of money into it and after two weeks my rear main seal obviously didnt seal cus i looked under it and its leakin like a mother after 2 weeks of babying it and trying to break it in real nice im gonna end up pullin the damn motor to change my seals so i feel your pain. and on top of that i get to hear everyone at the machine shop where i work give me **** cus they are all chevy guys.

 

slo65

New Member

May 26, 2003

448

0

0

Southern California

Aug 13, 2004

#10

• Aug 13, 2004

• #10

i feel your pain

dude i havent driven my car in 5 months, its been in a friends back yard my "friend" who supposibly was gonna help me hasnt helped me for a month or so "stuff keeps coming up" u know the usual stuff that would take up the time of an unemployed 20 year old living at home... (x box maybe?)... but yes i finally got my **** together and i towed it to a local shop its gonna be about 500 to finish everything up but i'm going to gladly pay it... in case you're guys are wondering why the hell i havent finished it myself i've had a job for a while now where i work 45 hour weeks, when i do have free time i spend it sleeping

 

MadMatt5oh

Member

Jan 10, 2003

441

0

16

St Paul, MN

Aug 13, 2004

#11

• Aug 13, 2004

• #11

xtrockx said:

sorry for snapping just having a really really bad day, little on edge.

Click to expand...

Cool man, I understand a typed sentence can be misconstrued. Seriously though, you should look for something good out of this and talk to that guy! I would be very emotional about the whole thing. I hope it works out for you man.

-Matt

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

Aug 13, 2004

#12

• Aug 13, 2004

• #12

Sorry to here about your extreme misfortune. Before you get any closer with that gasoline jug, there are some interior peices you may have that I'd be intereted in scavenging first...

seriously, good luck on the upside of all this. You'll get through.