• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Ready To Upgrade Stock 88 Gt, Suspension Help

  • Thread starter Thread starter Firehawk335
  • Start date Start date Jun 9, 2017
F

Firehawk335

Member
May 3, 2006
28
3
13
Jun 9, 2017
#1
  • Jun 9, 2017
  • #1
I know there are a tons of posts on which suspension to get etc, but I in trying to filter through all the posts, I seem to get more confused on what to do. So with that said, I am hoping I can ask for your opinions/suggestions.

I have an 88 GT mustang hatchback that is for all intensive purposes stock. Things I can tell have aged and the suspension just isn't what it was. With that said, I am looking to upgrade things for a more fun ride. This car never sees the track, and is a street ride only. I don't have a maximum motorsports budget, but don't want to buy the off brand ebay stuff either. Nor do I want to invest in something that looks good and then will wear out in no time. (Seems to be some of the reviews for SVE equipment, though I have no experience).

With that all said, I wondered if folks could make recommendations on what to do, specifically budget friendly, quality brands.

I think I want to start with rear control arms based on what I hear, but not sure what to do, nor what to do about those old springs of mine.

Any help is always appreciated and I certainly thank you for the time to read this post.
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
Jun 9, 2017
#2
  • Jun 9, 2017
  • #2
I like J&M hotpart for budget friendly parts.

I have had the LCAs on a few cars and my turbo car still uses them. I am about to install a set of them and C/C plates on my 85
 

MFE92

10 Year Member
Aug 25, 2010
1,094
373
124
Phoenix
Jun 10, 2017
#3
  • Jun 10, 2017
  • #3
New struts, new bushings, and new balljoints will transform the car without breaking the bank.
 
Reactions: Davedacarpainter

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Jun 10, 2017
#4
  • Jun 10, 2017
  • #4
MFE92 said:
New struts, new bushings, and new balljoints will transform the car without breaking the bank.
Click to expand...

+1 to this.

For the front lower control arm bushings look at the Ford Racing loaded lower control arms. They come with upgraded bushings and ball joints and when you get down to it not much more expensive than rebuilding your old ones and much easier.

For the rear, aftermarket lowers are good but stick with a stock rubber bushing uppers.
 
Reactions: Davedacarpainter

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Jun 10, 2017
#5
  • Jun 10, 2017
  • #5
On a budget-ish type of purchase, Strange makes some really nice shocks.

What do you want to do with the brakes? Staying sort of stock? MM does have a brake upgrade for the stock system.
 
F

Firehawk335

Member
May 3, 2006
28
3
13
Jun 12, 2017
#6
  • Jun 12, 2017
  • #6
Ok, so taking into what you all have recommended and doing some more looking, I was thinking about these: https://lmr.com/item/BBK-2526/79-98-Ford-Mustang-BBK-Rear-Upper-Lower-Control-Arm-Kit

I like the grease fittings which I see a lot of options don't have. I also came across these, http://www.americanmuscle.com/maximum-motorsports-rear-lower-control-arms-79-98.html which I was surprised to see under $300.

Anyone have any experience with either, or a recommendation of which would be better for my application?

If someone could recommend a spring set, or perhaps coil over conversion kit that would be greatly appreciated.
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Jun 12, 2017
#7
  • Jun 12, 2017
  • #7
Maximum Motorsports recommends keeping the stock uppers for most applications as they help ensure proper articulation of the rear end.

I have these lowers: https://lmr.com/item/MM-MMRLCA101/maximum-motorsports-mustang-sport-rear-control-arms-7998
and these uppers: https://lmr.com/item/LRS-5500CA-K/mustang-rear-upper-control-arms-79-04

I also run Steeda springs and Koni SRT.T shocks and struts. I couldn't be happier with the setup. Way better handling than stock and still has good ride quality.
 
N

ned911

Member
Mar 30, 2002
48
4
9
Round Rock, TX
Jul 5, 2017
#8
  • Jul 5, 2017
  • #8
You can also break up the upgrades into stages. I've added MM Bilsteins and caster/camber plates to my '88 GT, also did the 5-lug disc brake conversion. Once I paint and roll the fenders then I'll change the springs and do the rear lowers/uppers. Mine is my daily driver so nothing too radical.
 
You must log in or register to reply here.

Similar threads

Progress Thread 91GTstroked 90 7 up convertible build
  • 91GTstroked
  • Apr 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
330
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 22, 2026
91GTstroked
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
203
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
81
Views
3K
Fox 5.0 Mustang Tech May 6, 2026
AeroCoupe
D
97 V6 suspension upgrades
  • Dale1bre
  • Jan 18, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
337
SN95 V6 Mustang Tech Jan 19, 2026
Noobz347
B
Subframe connector question
  • B0udreaux
  • Jan 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
979
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 5, 2026
rednotch
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?