• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Recommend any good oxygen sensors?

  • Thread starter Thread starter fgtmustang95
  • Start date Start date Apr 13, 2006

fgtmustang95

New Member
Dec 6, 2004
45
0
0
El Paso, Tx
Apr 13, 2006
#1
  • Apr 13, 2006
  • #1
I think I need to replace my oxygen sensors. My stang makes this backfiring kind of noise when I try to accelerate and continues when I bring up the RPMs. I pulled a code 172 which means there is a fault in the HEGO sensors. Does anyone recommend a good brand? This really sucks too cuz its only been two days since I got my car back. Had some 3.73's installed and I have to drive like Ms Daisy
 

zenboy99

Founding Member
May 12, 2002
2,212
0
47
Madison, WI
Apr 13, 2006
#2
  • Apr 13, 2006
  • #2
The Bosch kind is what I've been told, thats what the ford unit (and most other manufacturers) are. Not sure if the Napa units are Bosch?

50resto has them for ~$90 a piece
 

mricci

Member
Aug 17, 2003
301
0
17
Massachusetts
Apr 13, 2006
#3
  • Apr 13, 2006
  • #3
I got my bosch ones for $70 a peice frmo autozone.
 

zenboy99

Founding Member
May 12, 2002
2,212
0
47
Madison, WI
Apr 13, 2006
#4
  • Apr 13, 2006
  • #4
mricci said:
I got my bosch ones for $70 a peice frmo autozone.
Click to expand...

Wow, go there. They're $119 at the Ford garage.
 

84convertablegt

New Member
Nov 6, 2004
589
0
0
Columbus, OH
Apr 13, 2006
#5
  • Apr 13, 2006
  • #5
59.99 for Motorcraft Ford originals from www.mustangsunlimited.com
 

MysteryMachine

Active Member
Jun 21, 2003
1,835
2
39
Parkesburg, PA
Apr 13, 2006
#6
  • Apr 13, 2006
  • #6
Advance has bosch ones can't remember how much they are though I think it was around $70
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 13, 2006
#7
  • Apr 13, 2006
  • #7
Just because you get a lean code, dont assume it's the lambdas. For instance, if you run 'self diagnostics' and you come up with a code for your lower back hurting, it could be a stubbed toe that you got last week that's causing you to walk funny and throwing your back outta whack.

Don recently posted some GREAT info about Bosch vs Ford O2's. I dont want to bastardize what he said, but my impression was that he said that the Ford Heater circuit is superior. That said, both sensors should work well. But if they are close in price, and I was shopping, I might get the Ford pieces based upon what Don said (he sees all the streams while tuning cars - who better to know than someone in his position!).

Good luck.
 
You must log in or register to reply here.

Similar threads

G
2006 Mustang GT o2 Sensor Wiring Issue Car Bogging/Choking
  • GCantero93
  • Sep 5, 2025
  • 2005 - 2009 Specific Tech
Replies
4
Views
999
2005 - 2009 Specific Tech Sep 6, 2025
Noobz347
R
93 LX 2.3 Trouble codes 53, 85, 21 help
  • Rickshaw302
  • Apr 15, 2025
  • 2.3L (N/A & Turbo) Tech
Replies
17
Views
588
2.3L (N/A & Turbo) Tech Apr 18, 2025
AeroCoupe
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
709
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
340
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
F
Resolved Stumble issue upon acceleration (1987 GT)
  • FoxDude87
  • Sep 16, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
3K
Fox 5.0 Mustang Tech Dec 3, 2024
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?