• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Removed oil baffle/Now losing oil

  • Thread starter Thread starter GTOreturns
  • Start date Start date Apr 14, 2009
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 14, 2009
#1
  • Apr 14, 2009
  • #1
I removed the oil baffle to put on 1.7 RR's. Ever since it has been losing oil. I thought it would be through the hose going to the TB. But someone else on this site said I was losing it through my PCV valve. Any feedback would be greatly appreciated. Thanks!
 
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 14, 2009
#2
  • Apr 14, 2009
  • #2
Anyone?
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 15, 2009
#3
  • Apr 15, 2009
  • #3
So, put the baffle back in....
 
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 15, 2009
#4
  • Apr 15, 2009
  • #4
vristang said:
So, put the baffle back in....
Click to expand...

Can't. Won't fit with 1.7 RR's.
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Apr 15, 2009
#5
  • Apr 15, 2009
  • #5
many people including myself have no baffle and dont have this problem. i dont what your problem is. hope this helps
 
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 15, 2009
#6
  • Apr 15, 2009
  • #6
ShortThrow50 said:
many people including myself have no baffle and dont have this problem. i dont what your problem is. hope this helps
Click to expand...

Nope. But thanks.
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Apr 15, 2009
#7
  • Apr 15, 2009
  • #7
GTOreturns said:
Nope. But thanks.
Click to expand...

 
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 15, 2009
#8
  • Apr 15, 2009
  • #8
WOW! This place really went dead. Couple of years ago I would have the answer to my problem already.
 
M

matts90lxhatch

New Member
May 2, 2007
33
0
0
Apr 16, 2009
#9
  • Apr 16, 2009
  • #9
I have always removed the stock valve cover baffles and NEVER once lost any oil due to it. If you are 100% sure that's what is causing it then just buy a new set of taller valve covers that can clear your rockers while using a baffle.

But honestly the baffle not being there isn't your problem.

The only time I have lost oil due to not having something there is when I was in a rush to put a new holley upper and lower on my car and forgot to put the oil screen in the back of the lower intake.
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
Cincinnati area
Apr 16, 2009
#10
  • Apr 16, 2009
  • #10
Yup, I don't have baffles either....the only oil I lose is out the rear main seal.

I'm not running the line from the oil filler neck to TB either though. Mine has a breather with a baffle built into it in that spot.

 
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 16, 2009
#11
  • Apr 16, 2009
  • #11
DocG2828 said:
Yup, I don't have baffles either....the only oil I lose is out the rear main seal.

I'm not running the line from the oil filler neck to TB either though. Mine has a breather with a baffle built into it in that spot.

Click to expand...

How do you know? Do you even know what a baffle is?
 

bigcat

start with the upper hole, and if more traction is
May 1, 2005
3,015
1
79
7200 feet
Apr 16, 2009
#12
  • Apr 16, 2009
  • #12
i bet you are burning the oil. when you installed the rocker arms, a valve is probably not seating correctly. pull the covers and inspect or do a compression test to see if the valves are sealing.
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
314
281
134
Apache Junction, AZ
Apr 16, 2009
#13
  • Apr 16, 2009
  • #13
GTOreturns said:
How do you know? Do you even know what a baffle is?
Click to expand...

You seem to be a bit BAFFLED, yourself.

Assuming you're running the stock E7 valve covers, removing the baffles would only create an opportunity for the oil to shoot up the oil filler neck on the passenger side and get sucked up through the fillter-to-TB line. If it's not doing that, then you're losing oil somewhere else, and it likely has nothing to do with whether or not your baffles are in place.

The PCV line would be the next thing I'd check. Pull the PCV valve out, peek down there and see if your PCV screen is still in there. If it hasn't been cleaned in awhile, take a long deck screw, poke it in there and give it a few turns, and then pull the screen out by hand or with a pair of pliers; from there, you can either do like I do and unroll the wire mesh stuff from inside there and spray the hell out of it with brake cleaner to get rid of the gunk buildup before rolling it back up and crimping it back together ... or just buy a new screen and pop it in there. Remove the PCV valve from the line and give it a shake - if it rattles freely, it's still good. Maybe give it a quick spray of brake cleaner or Seafoam Deep Creep to flush out any gunk buildup in there, too ... or, again, just replace the thing. (It's not like a PCV valve costs all that much.)

Beyond that ... who knows? Worn rings? Intake manifold gasket leaking oil from the lifter valley into the intake port(s)? Valve guide seals? Lots of other possibilities.
 

Nova

New Member
Aug 10, 2006
128
0
0
Apr 16, 2009
#14
  • Apr 16, 2009
  • #14
install and oil separator in the line between the cover and the intake. you can just use a box with a filter thing in it. if it gets all oily after a few days, you know where the oil is going.
 
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 16, 2009
#15
  • Apr 16, 2009
  • #15
Nova said:
install and oil separator in the line between the cover and the intake. you can just use a box with a filter thing in it. if it gets all oily after a few days, you know where the oil is going.
Click to expand...

what line between the cover and intake?
 
G

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
Apr 16, 2009
#16
  • Apr 16, 2009
  • #16
Darkwriter77 said:
You seem to be a bit BAFFLED, yourself.

Assuming you're running the stock E7 valve covers, removing the baffles would only create an opportunity for the oil to shoot up the oil filler neck on the passenger side and get sucked up through the fillter-to-TB line. If it's not doing that, then you're losing oil somewhere else, and it likely has nothing to do with whether or not your baffles are in place.

The PCV line would be the next thing I'd check. Pull the PCV valve out, peek down there and see if your PCV screen is still in there. If it hasn't been cleaned in awhile, take a long deck screw, poke it in there and give it a few turns, and then pull the screen out by hand or with a pair of pliers; from there, you can either do like I do and unroll the wire mesh stuff from inside there and spray the hell out of it with brake cleaner to get rid of the gunk buildup before rolling it back up and crimping it back together ... or just buy a new screen and pop it in there. Remove the PCV valve from the line and give it a shake - if it rattles freely, it's still good. Maybe give it a quick spray of brake cleaner or Seafoam Deep Creep to flush out any gunk buildup in there, too ... or, again, just replace the thing. (It's not like a PCV valve costs all that much.)

Beyond that ... who knows? Worn rings? Intake manifold gasket leaking oil from the lifter valley into the intake port(s)? Valve guide seals? Lots of other possibilities.
Click to expand...

Yeah, I have had problems with the intake gasket in the past.
 
You must log in or register to reply here.

Similar threads

A
Engine Genius installed oil filler above rocker arm…
  • afjLX
  • Mar 27, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
523
Fox 5.0 Mustang Tech Mar 29, 2025
nicholase
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
7
Views
289
SN95 V6 Mustang Tech Friday at 3:06 PM
gkomo
N
Edelbrock 1405 Setup
  • nathantaylor200
  • Nov 4, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
244
Classic Mustang Specific Tech Nov 5, 2025
nathantaylor200
N
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
273
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?