Removing and installing injectors

Ted87GT · May 5, 2004

Still working on installing the Trick Flow Intake. Finally got the old manifold off. Thanks to all who helped with that! Now I can't figure out how to remove the injectors? The instructions are no help. The factory manual doesn't help. I did a search of the forum but didn't find anything. Again I am worried about breaking anything. What's the story?

Smeckel · May 5, 2004

Just pull them out. Do it gently so the o-rings aren't damaged, but they should come out with little effort.

Gearbanger 101 · May 5, 2004

Dude, I just sprayed them with a little penetrating oil and used a claw hammer and a screwdriver for leverage to pry them out. It sounds dirty, but it works the best. It's not manditory, but I usually replace the O-rings and give the new ones a light coating of oil before installing them. They'll slide in slick as snot.

stlboarder · May 5, 2004

The real watery snot or that thick black snot you get after spray painting?

Gearbanger 101 · May 5, 2004

stlboarder said:
The real watery snot or that thick black snot you get after spray painting?

The nice slimey stuff. You wouldn't have that problem with the paint in your nose if you huff it throught an old sock, like the rest of us.

stlboarder · May 5, 2004

hahaha!... I'll make sure to remember that!

jrichker · May 5, 2004

Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit. The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:

http://www.partsplus.com/ or http://www.autovalue.com/ or http://www.pepboys.com/ or http://www.federatedautoparts.com/

Most of the links above have store locators for find a store in your area.

Removing and installing injectors

Ted87GT

Smeckel

New Member

Gearbanger 101

Straight Outta Locash

stlboarder

Gearbanger 101

Straight Outta Locash

stlboarder

jrichker

StangNet's favorite TOOL

Similar threads

Removing and installing injectors

Ted87GT

Smeckel

New Member

Gearbanger 101

Straight Outta Locash

stlboarder

Gearbanger 101

Straight Outta Locash

stlboarder

jrichker

StangNet's favorite TOOL

Similar threads

Privacy & Transparency

Privacy & Transparency