Exhaust Removing factory header from top for wb o2 bung

R

rockyracoon

10 Year Member

Nov 23, 2005

874

27

49

margate NJ

Nov 23, 2020

#1

• Nov 23, 2020

• #1

My bad. After unbolting header and powers steering a/c bracket I did remove header from the top only to realize sensor bung needs to be in h-pipe. Dam all that extra work. I just hate having to reinstall the heavy factory h-pipe pipe laying on my back. Maybe it's time for an aftermarket x or h-pipe.

 

Last edited: Nov 24, 2020

R

rockyracoon

10 Year Member

Nov 23, 2005

874

27

49

margate NJ

Nov 24, 2020

#2

• Nov 24, 2020

• #2

I had a bung welded in at a local muffler shop only charged me twenty bucks. The only issue is because it's a stock H pipe it doesn't allow the recommended 18 inches away from the exhaust ports.. hopefully I won't have any issues.

 

R

rockyracoon

10 Year Member

Nov 23, 2005

874

27

49

margate NJ

Nov 25, 2020

#3

• Nov 25, 2020

• #3

The bung Went in at around the eleven o'clock position not far from the factory bung location. Plenty of room for the sensor. So everything is back together, just have to run the 12 volts and ground wires.