Brakes Replaced Brakes Now The Front Are Locking Up Can Someone Help Me

35th Poohtang99 · Sep 5, 2012

Hi everyone ~

I know this is the place to come, when you need answers!

I have a 99 mustang GT 4.6 L Convertible. Recently, I have noticed that my front brake calipers aren't releasing like they're supposed to, especially when they get warm. When you jack the car up. I can only get about 1 revolution out of each side. I have heard several possibilities, but I want to hear from fellow Mustang lovers.

1999 Mustang GT Convertible

ProKiller · Sep 5, 2012

did you make sure the slides weren't rusted and were free?

revhead347 · Sep 5, 2012

Check to make sure the slides and the pistons move freely. Even if you compressed the piston, it could bind up if it has corrosion, debris or damage in it. Also, when you have it apart, go ahead and check your wheel bearings. They have a tendancy to wobble when they get older. It's easiest to check this with a dial indicator, but you could probably also do it by taping a string from the fender.

Kurt

g96v6-250k · Sep 5, 2012

if your fluid res is dirty you might want to take the calipers apart and use brake cleaner. if they are rusted under the seal at the piston, clean up the rust or replace the whole thing. if it has abs maybe the pressure relief valve is screwed up? i doubt that though

Brakes Replaced Brakes Now The Front Are Locking Up Can Someone Help Me

35th Poohtang99

New Member

ProKiller

revhead347

Apparently my ex-husband made that mistake.

g96v6-250k

Member

Similar threads

Brakes Replaced Brakes Now The Front Are Locking Up Can Someone Help Me

35th Poohtang99

New Member

ProKiller

revhead347

Apparently my ex-husband made that mistake.

g96v6-250k

Member

Similar threads

Privacy & Transparency

Privacy & Transparency