• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

replacement roller tips for roller rockers??

  • Thread starter Thread starter Foxfan88
  • Start date Start date Feb 5, 2008

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Feb 5, 2008
#1
  • Feb 5, 2008
  • #1
i have FRPP 1.73s and i have a few rockers that have flattened tips, i am wanting to replace just the rollers on the tip. do they sell just the rollers.
 
3

347HO

Member
Jan 13, 2008
462
2
16
Seattle
Feb 5, 2008
#2
  • Feb 5, 2008
  • #2
Do your rollers have "jesus" clips on the roller ends?
If so... call Ford and ask, I would think they have the parts if it's removeable.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Feb 5, 2008
#3
  • Feb 5, 2008
  • #3
the roller that acts as the fulcrum has a c-clip, but i am needing the little roller on the tip that sits on the valve stem, it looks like it has a pressed fit pin holding it in.

alot of companies sold individual rocker arms, but the 1.73 rocker arm i have didnt come individually. and i dont want to buy a new set, i may just go stud rockers.
 
3

347HO

Member
Jan 13, 2008
462
2
16
Seattle
Feb 5, 2008
#4
  • Feb 5, 2008
  • #4
I understood what you were talking about... I quickly searched and saw one of the "big" catalog stores sells them individually for 60.00 each. DAMN!

You could go that route or as you suggested... go stud mounted... or even shaft mounted for more stability.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 6, 2008
#5
  • Feb 6, 2008
  • #5
Crane Cams in Daytona Beach Fl was supposed to be the manufacturer of the FRPP roller rocker arms. Try contacting them to see if the will sell you some repair parts. See http://www.cranecams.com/
 

65ShelbyClone

Founding Member
Sep 9, 2000
4,675
38
119
Antelope Valley, SoCal
Feb 18, 2008
#6
  • Feb 18, 2008
  • #6
I had a problem like this several years ago. I had a pair of Crane/'93 Cobra rockers with pitted tips. I made the mistake of going through the Ford Parts department to get them at $40 a piece.

Summit sells the same thing individually for $20 each, part # CRN-44746-1.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
507
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
T
Oil burning on my recently buil 302
  • The blk67
  • May 15, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
250
Fox 5.0 Mustang Tech May 15, 2026
Noobz347
M
  • Poll Poll
Stroking a Mexico 289 or newer roller 302
  • MaryJaneTheMustang
  • Aug 12, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
162
1965 - 1973 Classic Mustangs -General/Talk- Aug 12, 2026
Bullitt347
G
Sup. Just got back into the game with a 1986 4-eye vert.
  • GeorgeG
  • Nov 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
155
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2026
limp
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
748
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?