• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

replacing Gas tank filler neck grommet??

  • Thread starter Thread starter Foxfan88
  • Start date Start date May 14, 2006

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
38
Miami, Ok
May 14, 2006
#1
  • May 14, 2006
  • #1
this might contribute to my bad MPG, the grommet is bad i think, b/c everytime i had alot of gas in the car, like when i just fill it up. If i turn left, gas spills out the side of the car. not out the filler hole. under the quaterpanel. I think where the neck meets the tank, there is a grommet there isnt there, How hard would it be to replace???, could i just pull the filler neck out and put a new one in, or would i have to pull the gas tank??
 

larrendeuce

Member
Sep 13, 2003
649
1
19
43
Southern NJ
home.comcast.net
May 14, 2006
#2
  • May 14, 2006
  • #2
A couple years ago I had a fuel pump put in mine, after it was disturbed it started to leak. I went back and they charged like $20 to replace it. (I don't like messing with gas because I stink for days and I work with oxygen so I'd get some funny looks.)

I think you would have to lower the tank to get the filler neck out to get to the grommet. A motorcycle jack would keep the tank level so nothing comes out of the filler hole.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 14, 2006
#3
  • May 14, 2006
  • #3
Yep, you lower the tank down a bit so the filler pipe can ingress/egress cleanly. Doesnt take too long for your first time.

Good luck.
 

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
May 14, 2006
#4
  • May 14, 2006
  • #4
exactly what HISSIN said.But I might add,make sure your gas tank is nearly empty before you tackle this (Go figure)...

I noticed,even when the tank is lowered,it's still a bitch to get the filler pipe out of the tank.Move the tank towards the drivers side as much as possible,and remove all bolts near filler cap.Pry out the old seal with a flat screwdriver.The new seal may seem impossible to install,but it has to seat tightly.Make sure the center groove in the seal seats all the way and careful not to damage it
 

Blk91stang

Member
Jan 3, 2003
607
0
16
41
North Brunswick, NJ
May 15, 2006
#5
  • May 15, 2006
  • #5
If it's only torn in a spot, you could try some rtv as a temporary fix. Did this on my g/f's car and no more leaks!!
 
You must log in or register to reply here.

Similar threads

F
Difference between 83-86 EFI and 87-97 gas tanks?
  • ForeverDrivin
  • Mar 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
290
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 30, 2026
ForeverDrivin
F
Fuel Gas tank seal
  • jeremyzcook82
  • Nov 21, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
1K
Fox 5.0 Mustang Tech Jan 1, 2025
manicmechanic007
G
1994 v6 gas leak after fuel pump replacement
  • Gav
  • Aug 16, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
957
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 28, 2024
AeroCoupe
P1450 issue 2015 ecoboost pp
  • matthewt
  • Apr 19, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
15
Views
2K
2015 - 2023 (S550) Mustang -General/Talk Apr 22, 2025
90sickfox
G
1991 GT 5.0 running hot
  • gvanginkel403
  • Jul 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
155
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?