Replacing steering column.
- Thread starter wgpaintballer
- Start date
04sleeper
Founding Member
gruvee87vertgt
20+ Year Stangneter 
I got one out of a 1987, it has the full colum and key ignition I can have shipped to you for $75.00
KENS89LX
Member
1. under thehood.. unbolt the steering knuckle, pull it apart.
2. inside the car.... take all the covers off the steering column, unplug the plugs, I believe there is 4, but not sure..
3. two bolts that hold the column up to the dash.
4. On the floor there is a rubber cover with several bolts,
5. That is the majority of the bolts, there may be a few small things to unhook, just be careful unplugging the wires at the steering column, they were very brittle on my 89!
2. inside the car.... take all the covers off the steering column, unplug the plugs, I believe there is 4, but not sure..
3. two bolts that hold the column up to the dash.
4. On the floor there is a rubber cover with several bolts,
5. That is the majority of the bolts, there may be a few small things to unhook, just be careful unplugging the wires at the steering column, they were very brittle on my 89!
Similar threads
