• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Retorqueing intake after install?

  • Thread starter Thread starter willys1
  • Start date Start date Aug 25, 2005

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Aug 25, 2005
#1
  • Aug 25, 2005
  • #1
Just like it says,,I have a few thousand miles on the motor after putting on Thumper heads.A few of the bolts on the intake werent to tight on the lower(the ones in view) Should I take off the upper and retorque the bolts on the lower? Anyone else have this problem?
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Aug 25, 2005
#2
  • Aug 25, 2005
  • #2
Yeah at least once..best twice, they will back off..pain in the ass, but necessary.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Aug 25, 2005
#3
  • Aug 25, 2005
  • #3
DMAN302 said:
Yeah at least once..best twice, they will back off..pain in the ass, but necessary.
Click to expand...
Thanks,,could I still reuse the gaskets for the upper or should I get new ones?
 

Daniel50

New Member
Mar 30, 2005
716
1
0
Discovery Bay, CA
Aug 25, 2005
#4
  • Aug 25, 2005
  • #4
check the gaskets and if there is any doubt change them. its not worth having a leak and a headache for an extra few dollars
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Aug 25, 2005
#5
  • Aug 25, 2005
  • #5
Daniel50 said:
check the gaskets and if there is any doubt change them. its not worth having a leak and a headache for an extra few dollars
Click to expand...
Thanks alot
 
8

8950HO

New Member
Mar 31, 2005
658
2
0
Aug 25, 2005
#6
  • Aug 25, 2005
  • #6
Retorque the lower intake bolts!!!

The last time I reinstalled my intake a couple years ago,I didn`t retorque the lower bolts after running it a while,I figured since I went over the final torque sequence numerous times until they were all even and torqued down,that it wasn`t necessary...
after all,nobody retorques them after they leave the factory,and they don`t seem to leak after they leave the factory.

Just under a year later I noticed a very slight coolant leak at the front of the lower intake manifold.Sure enough they were a little loose when I went to retorque them.After the retorque,the slight leak disappeared.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Aug 25, 2005
#7
  • Aug 25, 2005
  • #7
Im getting vaccum leak,it takes 2 times to start it in the morning and its starting to affect my idle.
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Aug 25, 2005
#8
  • Aug 25, 2005
  • #8
Yes, you can re-use the lower-to-upper intake gasket. Many times actually.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Aug 25, 2005
#9
  • Aug 25, 2005
  • #9
tmoss said:
Yes, you can re-use the lower-to-upper intake gasket. Many times actually.
Click to expand...
Good deal,,thanks T-Moss!!
 
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
530
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
766
Other Auto Tech Jul 13, 2026
General karthief
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
316
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
285
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?