Riddle me this PI People!!

J

joestang98

New Member

Apr 18, 2004

187

0

0

Vienna,WV

Jul 1, 2004

#1

• Jul 1, 2004

• #1

Hello,
I have a question of what to do...I have a 98 GT AODE and want to do the Livernois intake swap with the plates. I also want to swap to the PI Cams...
I don't think I want to do a head swap because I want a blower down the road. So the rise in compression would limit that. I just want to know if this will be worth the effort and $$ here are the list of my current mods.
-4:10 FRPP GEARS
-MARCH PULLIES
-ACCUFAB PLENUM and 70MM ACCUFAB TB
-BBK CAI
-SCREAMIN' DEMON COIL PACKS
-TAYLOR 10.5 WIRES
-ZEX DRY KIT 100 SHOT
-DIABLO DELTA FLIP CHIP
-NITTO 555R's DR
My milage is also 32,000
If any one know where I can get a set of PI cams on the cheap let me know!! THANKS!

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Jul 1, 2004

#2

• Jul 1, 2004

• #2

well if you are going with a blower, yes lower compression is good...the utltimate combo would be with a pi motor.....but why not go with some better cams than PI if you are going to be blown? I know vt makes some great cams, im sure one of their guys could tell you more about it. GOOD LUCK

 

kboy262

Active Member

Apr 20, 2003

437

0

26

Atlanta-Kennesaw

Jul 1, 2004

#3

• Jul 1, 2004

• #3

I don't believe you can use VT cams in a NPI head. But I do agree about getting better cams than the PIs. If you are going through the trouble then might as well put some better ones in. I have Comp Cams in my NPI car and it runs great. Plus the sound of the exhaust is nice. Here is a sound clip of mine.

http://members.cox.net/gmoney/cams.mpg

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Jul 1, 2004

#4

• Jul 1, 2004

• #4

Thank you for the corrective info kboy, i actually learned something today!! It has been about 3 1/2 years since i have been in the world of NPI's so pardon me if i need a little dusting up on the subject.....

 

J

joestang98

New Member

Apr 18, 2004

187

0

0

Vienna,WV

Jul 2, 2004

#5

• Jul 2, 2004

• #5

Kboy, Is this a good cam choice for N20 also? Did you have to replace the valve springs also? where is a good place to purchase those cams?
...what kind of power increase will I see with the Livernois kit and Comp cams togther do you think? FWHP and RWHP??? THANKS!!

 

J

joestang98

New Member

Apr 18, 2004

187

0

0

Vienna,WV

Jul 2, 2004

#6

• Jul 2, 2004

• #6

bump

 

J

joestang98

New Member

Apr 18, 2004

187

0

0

Vienna,WV

Jul 2, 2004

#7

• Jul 2, 2004

• #7

ttt

 

2

2002BLGT

Well-Known Member

Dec 18, 2003

2,945

4

59

Bedford VA

Jul 2, 2004

#8

• Jul 2, 2004

• #8

used PI motor with low miles would be another option and probably out do what you have in mind by a little bit