SorsCode
Dirt-Old 20+Year Member
I thought you were going to make it all wireless
The leather Im using on the dash actually just makes for a nice tight fit but not wrapping the center bezel in Leather. Now that its shape is what I want…I’m going to make a mold and make the final one out of carbon fiber.Did you have to clearance the edges any to allow for the thickness of the leather?
Because, why wouldn't you?The leather Im using on the dash actually just makes for a nice tight fit but not wrapping the center bezel in Leather. Now that its shape is what I want…I’m going to make a mold and make the final one out of carbon fiber.
What is crazy about this is, the place that makes these with vents, it would take any time at all to make it without. Their loss.Completed my first Carbon fiber piece. Its fitting its for this car too. The whole reason I got involved with Carbon fiber is no one offered me the piece I needed. A smooth cowl for my 94. I tried to get One place to
Make it and 4 yrs later nothing. So like Upholstery and machine work and a lot of other stuff I’m involved in now it started as a necessity. So KNK CarbonWorx is born.
I dont think Carbon Driven is making any parts at this point. IdkWhat is crazy about this is, the place that makes these with vents, it would take any time at all to make it without. Their loss.
The one I made is less than a pound. StockWhat does weigh compared to the original?
You have an NOS one there you could weigh and compareThe one I made is less than a pound. Stock
Is ?
Doesn't the filler neck vent need to be plumbed before the throttle body?Fab work is done on the custom center bezel. Just need to make it pretty from here.Coolant over flow line wrapped
Up with some more braided.
Its a check valve but Im rerouting anyway because I need that port for my regulator.Doesn't the filler neck vent need to be plumbed before the throttle body?