• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

rly hard start.....

  • Thread starter Thread starter 96_3.8stang
  • Start date Start date Nov 29, 2007
9

96_3.8stang

New Member
Nov 28, 2007
26
0
0
cherryville,NC
Nov 29, 2007
#1
  • Nov 29, 2007
  • #1
for the last couple of weeks my car wouldnt start and then last night it finally started but was rly hard to start and it wont stay running unless i keep givin it gas... if i let off gas it starts running rough and then stalls out and it wont crank back untill it cools off...if someone would give me sum advice it would be very helpful​
 

cjones

Founding Member
Jul 20, 2002
1,561
0
37
Avondale, AZ
Nov 29, 2007
#2
  • Nov 29, 2007
  • #2
any codes??

what's the fuel pressure key ON engine OFF??

will is start with the gas pedal slightly depressed??




(i'm not asking if your gas pedal is happy or sad )
 
9

96_3.8stang

New Member
Nov 28, 2007
26
0
0
cherryville,NC
Nov 29, 2007
#3
  • Nov 29, 2007
  • #3
lol yeah my gas pedal might need sum meds......i donno the exact fuel pressure when i press the thing in and get my sumone to crank it, it sparys really high and yeah it will crank with the gas pedal depressed
 

cjones

Founding Member
Jul 20, 2002
1,561
0
37
Avondale, AZ
Nov 29, 2007
#4
  • Nov 29, 2007
  • #4
96_3.8stang said:
... and yeah it will crank with the gas pedal depressed
Click to expand...

did you mean start?? if so, the IAC (Idle Air control) valve may be dirty or bad.
 
R

rlntlss

New Member
Jul 6, 2007
9
0
1
Nov 30, 2007
#5
  • Nov 30, 2007
  • #5
get your dtc's checked but it sounds like to me your cats are stopped up
 

doc4444

Founding Member
Jul 11, 2002
234
0
0
Dec 2, 2007
#6
  • Dec 2, 2007
  • #6
Check your fuel filter. That might be the cause too.
 
9

96_3.8stang

New Member
Nov 28, 2007
26
0
0
cherryville,NC
Dec 2, 2007
#7
  • Dec 2, 2007
  • #7
i took my iac valve off and it was dirty on the inside so i cleaned it out... but i hooked it bak up and left it where i could see the inside and had some one turn it over and it only moves a little bit how far is it saposed to open up?? also i took my fuel filter off at the gas tank and cleaned it out i could blow threw it so im guess thats not it cause im sure the fuel pump has enough pressure to push and also what is DTC's thanks for all the help..
 
You must log in or register to reply here.

Similar threads

L
1997 V6 Starting issue
  • leanzik04
  • Mar 20, 2026
  • SN95 V6 Mustang Tech
Replies
3
Views
251
SN95 V6 Mustang Tech Mar 20, 2026
Noobz347
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
315
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
F
1986 mustang no start
  • foxyjamss221
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
332
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2025
foxyjamss221
F
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
457
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?