• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Rocker Arms

  • Thread starter Thread starter ferga
  • Start date Start date Jan 29, 2008
F

ferga

New Member
Jun 5, 2004
22
0
0
Jan 29, 2008
#1
  • Jan 29, 2008
  • #1
Hi
A guy is selling me a set of 16 roller rocker arms, crane, 1.7 ratio for a $100.
Is there any performance gain? I read about 1.7 give you more lift with the same duration.
Currently my 93 has Edelbrock Performer heads and 3.73 gears, auto. If I put those rocker arms, could I lose daily driver manners? Or are they a nice improvement?
Thanks
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jan 29, 2008
#2
  • Jan 29, 2008
  • #2
Stock cam is .444 lift with 1.6 rockers. .444/1.6x1.7=.471 lift. It is a good mod and will gain power. You will not be able to tell the differance by driving it. This is with a stock cam correct?
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jan 29, 2008
#3
  • Jan 29, 2008
  • #3
You will not lose any driveability and it may give you a few HP.

They do tend to wear out the springs at a quicker rate.
 
F

ferga

New Member
Jun 5, 2004
22
0
0
Jan 29, 2008
#4
  • Jan 29, 2008
  • #4
Yes.
It has the stock cam
 
F

ferga

New Member
Jun 5, 2004
22
0
0
Jan 29, 2008
#5
  • Jan 29, 2008
  • #5
Do they do tend to wear out the springs at a quicker rate for the 1.7 ratio or anything else?. Can I drive the car long distances? I've been planning a trip, 1000 miles more o less.
thanks
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Jan 29, 2008
#6
  • Jan 29, 2008
  • #6
ferga said:
Do they do tend to wear out the springs at a quicker rate for the 1.7 ratio or anything else?. Can I drive the car long distances? I've been planning a trip, 1000 miles more o less.
thanks
Click to expand...


i have 1.7's. you'll be fine on your trip. they don't wear springs out fast, just faster than 1.6's.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jan 29, 2008
#7
  • Jan 29, 2008
  • #7
I put 100,000 miles on the stock springs with 1.7 them put the trickflow upgrade spring in and went another 100,000. You will be fine.
 

Fast63

New Member
Sep 20, 2007
717
0
0
Jan 30, 2008
#8
  • Jan 30, 2008
  • #8
your lift will change to the .471 as mentioned earlier. your total duration of 262 degrees will not change. your duration measured at .050 lift will change. I recommend the 1.7's for stock cams to give it a little more character
 

Nova

New Member
Aug 10, 2006
128
0
0
Jan 30, 2008
#9
  • Jan 30, 2008
  • #9
he already has edlebrock heads, so the springs should be fine.

just drive it anywhere and everywhere.
 
P

PJC Racing

New Member
Nov 21, 2007
199
0
0
Jan 30, 2008
#10
  • Jan 30, 2008
  • #10
Nova said:
he already has edlebrock heads, so the springs should be fine.

just drive it anywhere and everywhere.
Click to expand...

Edelbrock uses junk springs to start with, if there are any kind of miles on those heads I would replace the springs.
 
3

347HO

Member
Jan 13, 2008
462
2
16
Seattle
Jan 30, 2008
#11
  • Jan 30, 2008
  • #11
PJC Racing said:
Edelbrock uses junk springs to start with, if there are any kind of miles on those heads I would replace the springs.
Click to expand...

Exactly!
and in most cases, going to a 1.7 ratio from a 1.6 will "shift" your power band to higher revs. Not really make more power, but just move it from lower revs to a bit higher.
 
You must log in or register to reply here.

Similar threads

9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
602
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
912
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
SOLD For Sale '92 LX Street/Drag car - WV
  • MikeyMustang
  • Apr 12, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Dec 31, 2025
MikeyMustang
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
466
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?