• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Rocker Studs

  • Thread starter Thread starter FordGuy88
  • Start date Start date May 3, 2006
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
May 3, 2006
#1
  • May 3, 2006
  • #1
I was putting new rocker studs in my heads and I was wondering if there was any toque specs on them. I have aluminum heads if that helps. Also is there any spacers that go between the rocker and the stud? These are my first set of stud mount rockers and I want to do it right. Thanks for any response.

Thanks,
Dave
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
May 3, 2006
#2
  • May 3, 2006
  • #2
This should get you started: Crane Cams Instructions
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
May 3, 2006
#3
  • May 3, 2006
  • #3
ARP says 55 ft. lbs. That seems high. I just dont want to mess up because they are aluminum heads.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 4, 2006
#4
  • May 4, 2006
  • #4
that does seem high. pedistal is only 19 or 20 ft/lbs. crane instructions looked like 25 ft/lbs. i would give arp a call to make sure. by the way buy a good set of locking nuts for the rockers themselves. i had 1 two many rockers come off with those stupid acorn self locking nuts.
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
May 4, 2006
#5
  • May 4, 2006
  • #5
AFR says to torque the rocker studs to 60 ft/lbs. That's what I did, and that's what it is running just fine with.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
May 4, 2006
#6
  • May 4, 2006
  • #6
55-60 ft/lbs for a 3/8" rocker stud is fine.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 4, 2006
#7
  • May 4, 2006
  • #7
well there you have it 55 ft/lbs it is.
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
May 4, 2006
#8
  • May 4, 2006
  • #8
Alright thanks a lot guys.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
526
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
Engine Roller Rocker Stud Size, GT40P heads
  • foxbodyclark
  • Jan 25, 2025
  • Fox 5.0 Mustang Tech
Replies
14
Views
2K
Fox 5.0 Mustang Tech Jan 26, 2025
2000xp8
G
Sup. Just got back into the game with a 1986 4-eye vert.
  • GeorgeG
  • Nov 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
166
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2026
limp
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
606
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?