Rollcage AND Subframe Needed?

WhiteThunder

New Member
Oct 16, 2005
52
0
0
As some of you know I'm getting a nice firm plan for how I'm restoring my convertible but I've run into a dilemma. I going to put some form of undercoating on my car and coat the interior while it's stripped. (I never want rust again if I can help it.) I'm going with a cage on the interior because of all the reasons one would need a cage and I had subframes connectors on my list of parts too. Will I need both? I'm having to put new exhaust on it and I'm going to coat the bottom at the same time which would mean subframes would be needed now. Interior will take awhile to get everything together so the cage can hold off for a little while. This isn't going to be some hardcore race car either so I won't need tons of stiffening I just want it to feel a little more solid. What would you guys do?
 
Depends on what kind of times you expect to be running in the future. NHRA mandates a roll bar on 'verts when you're running below a certain E/T ... although I can't recall exactly what time, exactly (13.49, I think). A cage will also help stiffen up the frame significantly, but do keep in mind that they add a bit of weight, as well.

Subframes are a good idea on ANY Fox 'vert, period. I'm planning to put a set on my '86 GT, even though it's a sluggish all-stock slug at the moment - I'm just sick of all of the chassis flex. Subs make the suspension do all of the work, rather than the chassis, itself, so not only will it make your car ride better, but it'll help with cornering and launch, as well.

If you can, get a cage that ties in with your subframes so that they bolt/weld together as a solid unit. Maximum Motorsports has a decent setup, I've read, as well as Wolfe Racecraft - maybe give those a peek.
 
Thanks for the thoughts guys. I think I'm going to just go with the subframes and not worry about the bar. Which I didn't realize my mistake earlier I was talking about a roll bar and not a cage. Been sick lately and I've been sorta out of it. I'm not planning on dragging the car or anything...well, maybe a few times. With what I'm at though, HP wise, I don't think I'll be in the 13's. I don't want the car any faster, it has enough balls for a street daily driven car. Thanks again guys.
:SNSign: