Roller Rockers with GT40-P heads?

bobbys9350

New Member

Mar 30, 2005

472

0

0

Oct 24, 2006

#1

• Oct 24, 2006

• #1

Are there any roller rockers that will work out there with 99 explorer gt40p heads? i had the guideplates, 5/16x3/8 studs, and proform rockers. The rockers sat to high and were a little to far past the tip of the valve. Is there a company out there that makes a set??? thanks!

 

bobbys9350

New Member

Mar 30, 2005

472

0

0

Oct 25, 2006

#2

• Oct 25, 2006

• #2

ANYONE?

 

RYC CUKR

Founding Member

May 19, 2002

1,437

1

38

Orlando

Oct 25, 2006

#3

• Oct 25, 2006

• #3

my p heads were pedestal mount rockers. I ran scorpion 1.6 rrs on my ps

 

1Bad88notch

New Member

Oct 4, 2005

62

0

0

Leesburg,FL

Oct 25, 2006

#4

• Oct 25, 2006

• #4

i have fms 1.6 roller rockers on my gt40s

 

MAC'n89Blckstng

Active Member

Jun 11, 2003

1,012

4

36

NJ

Oct 25, 2006

#5

• Oct 25, 2006

• #5

GT-40s are pedestal mount heads (unless you modify for stud mount) theres no point in doing that at all.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Oct 25, 2006

#6

• Oct 25, 2006

• #6

The fact that the rockers didn't align properly means that:
A.) They were the wrong ones for your engine

or

B.) They needed some diffferent push rods or shims under the rockers to get them aligned correctly.

See www.cranecams.com for what you need.