Roller Rockers

[86silverbullett]

I have just recently re-built my motor and was wondering if roller rockers would help me that much. I dont have enough money for a set of heads. If they would help me what would be the best to buy?
Thanks

 

[bobbys9350]

Comp-Pro Magnums .

 

[jammer84_03]

yes they will. and make sure to get the 7/16...the 3/8's are a waste of time....i've snapped two so far

 

[86silverbullett]

Which would be better to have the 1.6's or the 1.7's?

 

[DW5.0L]

Depends on your set up. I went with FRPP 1.6's.

 

[jammer84_03]

i got 1.7s with the e303.....i make tons more power with ti...and the throttle is nice and snappy

 

[Paul Perreca]

if i were you i'd wait till i had a set of aftermarket or gt 40 heads - you won't feel any difference (seat of pants) - you may run into clearance issues w/ the valve covers that could thus be avoided by using the stock rocker arms - deal w/ them when you go ALUMINUM!!

 

[jammer84_03]

i still have my stock valve covers, and it made a dif when i went to the 1.7 rockers. imo

 

[Sicarius428]

Wait till you get some heads because you want the stud mounted RR if you are planning on getting some at all.
Kevin

 

[65ShelbyClone]

^ x2

It will be easier to get stud mounted rockers with matching heads later.

 

[legalize420]

yes they will. and make sure to get the 7/16...the 3/8's are a waste of time....i've snapped two so far

ped mount rockers are 5/16

 

[jammer84_03]

i was reffering to stud mount, and those are 7/16....

 

[legalize420]

i was reffering to stud mount, and those are 7/16....

he has stock heads. stock heads are ped mount.