• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Rough idle at start-up and white smoke after AFR 165 install

  • Thread starter Thread starter RacEoHolic330
  • Start date Start date Jun 30, 2004

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Jun 30, 2004
#1
  • Jun 30, 2004
  • #1
I recently installed a set of AFR 165 61cc heads along with a anderson b-31 cam. When I go to start up the car it idles really rough and bounces all over the place from 500 to 1100 rpm. If I rev the engine to 1500 for a little while or drive the car and then stop, the idle smooths out and everything is okay. Why would it do that?

Also, when I really get on the gas while driving and rev the engine past 5000 rpm and let off the throttle to shift, it lets a good amount of white/greyish smoke out the back of the car. I know it isn't coolant. I've had a coolant leak before and this smells totally different. My coolant level hasn't moved at all. It doesn't smell like oil either. It only does it when the car is under load, not if i rev it to 5k while it's in neutral. The engine does pull really hard, however, I do have a small exhaust leak at the header collectors. My timing is at 18* (no pinging) and my fp is a 39 psi without the vacuum attached.

Any help is appreciated.

-scott
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
Jun 30, 2004
#2
  • Jun 30, 2004
  • #2
sit on it for a while with the smoke see if it keeps doing it after a couple of days. as for the rough idle that could be caused by your cam try pulling some codes. and drill a hole in your TB plate try replacing the Iac or tps.
 
9

90whitepony

New Member
Jan 12, 2004
121
0
0
Jun 30, 2004
#3
  • Jun 30, 2004
  • #3
If you figure it out let me know mine does the same thing but only when it is warm and I start it cold starts are fine.
 

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Jun 30, 2004
#4
  • Jun 30, 2004
  • #4
I'm gonna clean that IAC and readjust the TPS tomorrow. I'll also check for codes too.
 

r6bullet

New Member
Jul 25, 2003
112
0
0
Jun 30, 2004
#5
  • Jun 30, 2004
  • #5
Can you explain the smell of the smoke any better? If you just installed your cam and heads the maybe you could be buring off some assembly lube
 
9

9 Deuce GT

Member
Dec 10, 2003
550
1
16
Geneva, NY
Jul 1, 2004
#6
  • Jul 1, 2004
  • #6
After I installed my 165's and intake, the car ran crappy and would stall if I came to a stop. After a few days of driving (maybe a week), it stopped. THe computer has to relearn how to act with the new parts. Now it's a ****in beast.
 
You must log in or register to reply here.

Similar threads

K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
98
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
664
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
G
Idle surging after warm up
  • GALLY3309
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
135
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2026
Noobz347
2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
354
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?