• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

RPM Questions

  • Thread starter Thread starter NPIGT
  • Start date Start date Jan 6, 2007
N

NPIGT

New Member
Nov 29, 2004
96
0
0
Jan 6, 2007
#1
  • Jan 6, 2007
  • #1
Hey guys I'm having a hard time fixing a rpm problem. What happens is that when I'm driving down the road I will push the clutch in and the rpm's will drop down to 1500 and hang at that position until I come to a complete stop, then they drop down to idle. I have recently replaced the IAC. Today I replaced the TPS and it still happens. So I took the IAC off and added another piece of gasket material because I have heard that some other stangers had rpm problems with that gasket. Now it drops down to 1100 rpm's and stays. Anyone have any idea of what the problem is, please help. Thanks, guys
 

Bolt on 5.0

Founding Member
Jun 26, 2002
302
0
17
Suffolk, NY
Jan 6, 2007
#2
  • Jan 6, 2007
  • #2
on any car if you rev it and let the rpms come down they will hang for a few and the drop to idle. I really do not think your problem is serious, not sure if the computer tells the rpms to hang while the car is in motion or not, but not somthing I would be to worried about.
 

CRZYHRSGT

New Member
Feb 14, 2004
240
0
0
5.7 miles north of THE Ohio State University
Jan 7, 2007
#3
  • Jan 7, 2007
  • #3
Mine does the same thing as have a lot of other cars that I've driven...even automatics. I seriously don't think it's hurting anything as long as it doesn't try to go to redline...
 

Bolt on 5.0

Founding Member
Jun 26, 2002
302
0
17
Suffolk, NY
Jan 7, 2007
#4
  • Jan 7, 2007
  • #4
posted in a nother thread I was reading, I agree with this statment-

LaserRed01GT
My Garage
Official Member Posts: 192
Join Date: October 2006
Location: Clearwater, FL


Yesterday, 09:08 PM

--------------------------------------------------------------------------------

It's actually pretty rare for a TPS to malfunction. It is not uncommon on these cars for the RPM's to "hang" when the clutch is pushed in. This promotes catalytic converter longevity and reduces emissions. But there are quite a few people that have made or ordered a specially made gasket that goes in between the IAT and the plenum.

Do a search for "hanging RPM's" or something to that effect.
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
617
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
859
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
W
2016 Mustang GT fuel tank leak
  • Waynetk16
  • Oct 8, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
136
2015 - 2023 (S550) Mustang -General/Talk Oct 9, 2026
gkomo
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
328
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
690
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?