Well guys im doing my research here and since i buy a part piece by piece.....I want to know all i need to install some afr165 or 185's. with an intake....im keeping stock cam,for preference(but who knows if im gonna tear down the top end!!!)also would i want to keep it sleep stock and dont want a cam selling my idle off as modded...
so so far i have this.
1)afr165 pedestal 1000(used)-1400
2)GT40-380.00$
2.5) 70-75mm throttle(do i need new bolts for this to attach to the gt40,or possibly the egr spacer)
3)Head gaskets
4)Valve cover gaskets
5)Water pump gasket
6)intake lower gasket.
7)head bolt kit
8)some headers( im gutting my h -pipe into some LM1's) so i want shorties correct, and do i need different bolt for the new heads..)
9) some autolite 25's
all to match my 3.73's and last mod pullies....
then off to comsmetics and saving for maf conversion and blower........
and when i rip the aod to hell in like 5mins 5spd swap....
no money in the bank. but i bet i can get there first
how much should this take me up to... about 280@ the wheels???
so so far i have this.
1)afr165 pedestal 1000(used)-1400
2)GT40-380.00$
2.5) 70-75mm throttle(do i need new bolts for this to attach to the gt40,or possibly the egr spacer)
3)Head gaskets
4)Valve cover gaskets
5)Water pump gasket
6)intake lower gasket.
7)head bolt kit
8)some headers( im gutting my h -pipe into some LM1's) so i want shorties correct, and do i need different bolt for the new heads..)
9) some autolite 25's
all to match my 3.73's and last mod pullies....
then off to comsmetics and saving for maf conversion and blower........
and when i rip the aod to hell in like 5mins 5spd swap....
no money in the bank. but i bet i can get there first
how much should this take me up to... about 280@ the wheels???