• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Rust in coolant passages on e7's

  • Thread starter Thread starter just_a_guy84
  • Start date Start date Jul 15, 2006
J

just_a_guy84

Member
Jun 27, 2003
32
0
6
Jul 15, 2006
#1
  • Jul 15, 2006
  • #1
just got some e7 heads off ebay, the heads themselves look fine, however, in the coolant passage ways there is a good deal of rust inside. should I try to clean these out before I bolt them on, or bolt them on, run the motor, flush, run, repeat? potential problems? I am sure that there are going to be plenty. like clogging up the radiator, waterpump, and heater core. any suggestions, I have a hard time believing these heads are ruined, I just am not really sure how to go about solving my problem. sorry for the longish post. Thanks Aaron
 

mustangillusion

Founding Member
Jun 24, 2001
74
0
0
Oklahoma
Jul 16, 2006
#2
  • Jul 16, 2006
  • #2
you could try to get a round 1" wire brush that you could attach to your drill, but be carefull not to let it brake off, blow out debris with compressed air and rinse before installing.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jul 16, 2006
#3
  • Jul 16, 2006
  • #3
or put them in a wash like you do to an engine. since they are off i would try to clean them before i installed them.
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Jul 16, 2006
#4
  • Jul 16, 2006
  • #4
if your car is 84 your'd have the flat toped cam, do you have to do anything special to make them work on the car?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jul 16, 2006
#5
  • Jul 16, 2006
  • #5
some say you need valve reliefs cut into your pistons to make them work but then others have run e7's on 302's without pistons cut with reliefs. the key is running a cam with not tons of duration.
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
753
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?