SCT Advantage III Racer Pro Software

  • Sponsors (?)

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
7,965
4,518
204
30
Hillsborough county
I have been busy, I will take a look. If i remember correctly there should be a TPS follower for idle...
 

Onesick99GT

Active Member
Nov 20, 2018
212
25
38
32
Dayton, Ohio
Just let me know. Not sure what you mean by tps follower. ill find out what that is and see if I have an option in the SCT software for this. It might be labeled as something else.
 

jozsefsz

5 Year Member
Aug 11, 2013
1,033
201
94
48
Cleveland OH Area
hey @a91what would be happy to help out if I can. presently I have my idle locked into open loop (disabled adaptive learning) because my setup seems to prefer richer-than-stoich. I follow the https://www.efidynotuning.com/ philosophy on getting the MAF and injectors dialed in so I take no credit for any independent thoughts on the matter.

A hanging idle can be adjusted out via the IAC flow parameters, or a manual adjustment to the throttle stop or idle air bleed.
Way more information here than I could ever post: https://www.efidynotuning.com/idleair.htm

Let me know whatever I can help with, and if I can I'll try, and if it's above my pay-grade I'll let you know. :)
 

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
7,965
4,518
204
30
Hillsborough county
Thanks! I do ALOT of standalone tuning and can do just about anything with there software but the OEM stuff... I dont play with too often as the software is crazy expensive and all my junk is old enough to need a standalone.
 

Similar threads