SCT Advantage III Racer Pro Software
- Thread starter OneSick99GT
- Start date
-
Sponsors (?)
I have been busy, I will take a look. If i remember correctly there should be a TPS follower for idle...
Just let me know. Not sure what you mean by tps follower. ill find out what that is and see if I have an option in the SCT software for this. It might be labeled as something else.
jozsefsz
15 Year Member
hey @a91what would be happy to help out if I can. presently I have my idle locked into open loop (disabled adaptive learning) because my setup seems to prefer richer-than-stoich. I follow the https://www.efidynotuning.com/ philosophy on getting the MAF and injectors dialed in so I take no credit for any independent thoughts on the matter.
A hanging idle can be adjusted out via the IAC flow parameters, or a manual adjustment to the throttle stop or idle air bleed.
Way more information here than I could ever post: https://www.efidynotuning.com/idleair.htm
Let me know whatever I can help with, and if I can I'll try, and if it's above my pay-grade I'll let you know.
A hanging idle can be adjusted out via the IAC flow parameters, or a manual adjustment to the throttle stop or idle air bleed.
Way more information here than I could ever post: https://www.efidynotuning.com/idleair.htm
Let me know whatever I can help with, and if I can I'll try, and if it's above my pay-grade I'll let you know.
Thanks! I do ALOT of standalone tuning and can do just about anything with there software but the OEM stuff... I dont play with too often as the software is crazy expensive and all my junk is old enough to need a standalone.
Similar threads
