• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Seafoam is teh *****!

  • Thread starter Thread starter MidnightGT
  • Start date Start date Jul 6, 2005
Prev
  • 1
  • …
  • 8
  • 9
  • 10
  • 11
  • 12
  • …
  • 42
Next
First Prev 10 of 42 Next Last

menasci

Member
Aug 17, 2003
640
1
16
Chandler, AZ
Oct 14, 2005
#181
  • Oct 14, 2005
  • #181
Also,
Where the hell do I put the seafoam in?
The Brake Booster Line or the PCV????
And where the hell are those items located???
My 2001 is the early 2001.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 14, 2005
#182
  • Oct 14, 2005
  • #182
menasci said:
Also,
Where the hell do I put the seafoam in?
The Brake Booster Line or the PCV????
And where the hell are those items located???
My 2001 is the early 2001.
Click to expand...
Check out this thread, it's got all of the information you need to perform the task. http://forums.stangnet.com/showthread.php?t=561567
 

menasci

Member
Aug 17, 2003
640
1
16
Chandler, AZ
Oct 14, 2005
#183
  • Oct 14, 2005
  • #183
Gearbanger 101 said:
Check out this thread, it's got all of the information you need to perform the task. http://forums.stangnet.com/showthread.php?t=561567
Click to expand...

Same thread dude.
I saw the pics posted and I'm still not sure where it goes.
 

ponysarepretty

New Member
Jul 25, 2005
578
0
0
Oct 14, 2005
#184
  • Oct 14, 2005
  • #184
menasci said:
Same thread dude.
I saw the pics posted and I'm still not sure where it goes.
Click to expand...

Open the hood.

Look under the air filter hose, there shoudl be a pipe that goes from the passenger side intake into the upper plenum. It shoudl be VERY easy to remove, except for the fact that you have to lift up the hose to access it. Turn on the engine. Have someone hold the revs up or just open the trottle with your hand. Have it suck in the seafoam. Settle for a few minutes. Open her up on the highway.
 
S

SMRcalidiv

Founding Member
Aug 14, 2002
496
0
16
Sacramento, CA
Oct 14, 2005
#185
  • Oct 14, 2005
  • #185
its oil change time for me , do i put it in pre-oil change and if so, how long do i leave it before getting the oil changed?
 

Sid3ways S13

20+ Year Stangneter
Mar 28, 2004
60
0
6
NW Ohio (Swanton)
Oct 14, 2005
#186
  • Oct 14, 2005
  • #186
I'm very tempted to do this, is this going to effect my blower at all? I really just worried about this stuff being in the oil and circulating through the small gears in the blower. Would that really have any effect? Anyone else do this with a blower that gets oil from the pan?
 

97GTSTANG

Founding Member
May 25, 2000
852
0
17
Virginia
Oct 14, 2005
#187
  • Oct 14, 2005
  • #187
SMRcalidiv said:
its oil change time for me , do i put it in pre-oil change and if so, how long do i leave it before getting the oil changed?
Click to expand...

I put half a can in the crankcase 1day before i did an oil change and i put the rest in the gas tank.
 

ponysarepretty

New Member
Jul 25, 2005
578
0
0
Oct 14, 2005
#188
  • Oct 14, 2005
  • #188
97GTSTANG said:
I put half a can in the crankcase 1day before i did an oil change and i put the rest in the gas tank.
Click to expand...

Does it smoke much when it goes into the crankcase?
 
M

MAXX RS4

New Member
Jun 1, 2005
83
0
0
Oct 14, 2005
#189
  • Oct 14, 2005
  • #189
ponysarepretty said:
Does it smoke much when it goes into the crankcase?
Click to expand...


If you're running on the oil, then yea - it'll smoke.

It shouldn't smoke if you put it in the crankcase unless you have some blowby or something.. Change the oil soon though!
 
U

UhadMEatGT

New Member
Apr 2, 2005
117
0
0
Oct 15, 2005
#190
  • Oct 15, 2005
  • #190
I wouldnt drive anywhere. I recommend changing your oil, immediately after the seafoam. My cousin heard from me about my two vehicles. He came over so I could seafoam his 2001 Maxima with 75K miles. It put on a good smoke show, about the same as my Mustang. You will see when it stops smoking. When its all done, then change your oil. He called me yesterday to say he was happy with throttle response and smoothness. Another satisfied Seafoamer!! Next oil change will be my wifes 01 Sebring vert with 75K on the clock. Should be another fine smoke show!!
 

ponysarepretty

New Member
Jul 25, 2005
578
0
0
Oct 15, 2005
#191
  • Oct 15, 2005
  • #191
2000 miles and I will run the foam through the crankcase.
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Oct 15, 2005
#192
  • Oct 15, 2005
  • #192
Seafoam How-To Video

Alright guys...this is the first video I've ever made, so please excuse the crappiness of it. Below are 2 videos, first is the how-to feed your engine seafoam, and the 2nd is a small glimpse of what the smoke looks like. I didn't get much smoke since I did this only about 2,000 or 3,000 miles ago, but you will get smoke for about 10 minutes.

How To Feed Your Engine Seafoam
Seafoam Smoke Results
 

Sid3ways S13

20+ Year Stangneter
Mar 28, 2004
60
0
6
NW Ohio (Swanton)
Oct 15, 2005
#193
  • Oct 15, 2005
  • #193
You a pimp, thanks for the vid man, I think I'm going to do this to the stang tomorrow.
 

menasci

Member
Aug 17, 2003
640
1
16
Chandler, AZ
Oct 15, 2005
#194
  • Oct 15, 2005
  • #194
Sweeeeeeeeeeeeet!
Thanks for the Vid!
Not too much smoke though eh?
I suppose it' becuase you've done the Seafoam a few times already.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Oct 15, 2005
#195
  • Oct 15, 2005
  • #195
Nice, i can't believe some still can't figure this out without a vid after 8 pages....
 

menasci

Member
Aug 17, 2003
640
1
16
Chandler, AZ
Oct 15, 2005
#196
  • Oct 15, 2005
  • #196
droptopponynj said:
Nice, i can't believe some still can't figure this out without a vid after 8 pages....
Click to expand...

I'm one of those.
Guess I'm just worried I'm gonna F-up my Stang.
Do you have to get an oil change right after doing what the guy in the vid did?
Or only right after adding to the oil?
Also....
Do I just pour the stuff in the oil fill hole?
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Oct 15, 2005
#197
  • Oct 15, 2005
  • #197
No need for an oil change after the way I did it in the video. I believe you pour it straight in your oil fill, but I could be wrong. You would need an oil change after that, though . The way I did it makes it burn through the exhaust.

I'm glad y'all appreciate the video. I know I could have used one when I did it -- I got it wrong the first few times and wasted almost a whole can of seafoam.
 

97GTSTANG

Founding Member
May 25, 2000
852
0
17
Virginia
Oct 15, 2005
#198
  • Oct 15, 2005
  • #198
menasci said:
I'm one of those.
Guess I'm just worried I'm gonna F-up my Stang.
Do you have to get an oil change right after doing what the guy in the vid did?
Or only right after adding to the oil?
Also....
Do I just pour the stuff in the oil fill hole?
Click to expand...

After what you see in the video, u dont need to do an oil change, only after you put it in the Oil Fill Hold(crankcase). Yes, you put the seamform in the oil fill hole (Crankcase) but after you do that, get an oil change
 
S

Stang01GT

New Member
Apr 20, 2003
138
0
0
New Jersey
Oct 15, 2005
#199
  • Oct 15, 2005
  • #199
ok after all this talk about seafoam i bought a can today and decided to try it out. but i dont think i did it right. i have a 2001 mustang gt and i took the tube off that goes in to the drivers side valve cover. there was suction coming from it so i thought thats where the seafoam goes, anyway i used almost the whole can turned the engine off for 15 min and started it back up and no white smoke at all, i drove it around for 15 min and still no white smoke, looking at the video posted i guess i did it the wrong way but in one of the first pages it shows a pic of the same tube i used.
 

ponysarepretty

New Member
Jul 25, 2005
578
0
0
Oct 15, 2005
#200
  • Oct 15, 2005
  • #200
1. How many miles does your car have?

There aren't that many valves that have vacuum... i don't know what you could have done wrong, and you probably used to much.
 
Prev
  • 1
  • …
  • 8
  • 9
  • 10
  • 11
  • 12
  • …
  • 42
Next
First Prev 10 of 42 Next Last
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
289
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Eastern North Carolina Autocross Events!
  • Warhorse Racing
  • Feb 23, 2026
  • Regional Forums and Event Information
Replies
0
Views
347
Regional Forums and Event Information Feb 23, 2026
Warhorse Racing
  • Locked
93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • The Welcome Wagon
Replies
15
Views
572
The Welcome Wagon Oct 28, 2025
Noobz347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
184
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
716
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?