• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Seafoam is teh *****!

  • Thread starter Thread starter MidnightGT
  • Start date Start date Jul 6, 2005
Prev
  • 1
  • …
  • 4
  • 5
  • 6
  • 7
  • 8
  • …
  • 42
Next
First Prev 6 of 42 Next Last

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Jul 11, 2005
#101
  • Jul 11, 2005
  • #101
Those hoses you guys are posting that your pouring that stuff into is not the PCV hose...you do realize that right? IMO you shouldnt put it into the PCV (unless its not liquid) because if its heavy enough it will run back into the filter. But if it doesnt, it would clean the TB. I just put a oil seperator inline on my PCV hose, so it may be a little tougher for me LOL. Hasnt cought any oil though, it will once I start romping on it again though LOL.
 

COBRA90GT

Mustang Master
Sep 22, 2001
6,654
0
87
HOCKEYTOWN ® , MI
Jul 12, 2005
#102
  • Jul 12, 2005
  • #102
01TrueBlueCobra said:
SEAFOAM VIDEO. Right click and SAVE AS.

http://www.ponypanels.com/zim/seafoam.wmv
Click to expand...


Mother of God that's a lotta smoke.
 

flashstang04

New Member
Jun 7, 2004
154
0
0
Wichita Falls,Tx
Jul 12, 2005
#103
  • Jul 12, 2005
  • #103
Where would you put this on older carb cars, in the gas tank?
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Jul 12, 2005
#104
  • Jul 12, 2005
  • #104
flashstang04 said:
Where would you put this on older carb cars, in the gas tank?
Click to expand...
Break booster line.
 

97GTSTANG

Founding Member
May 25, 2000
852
0
17
Virginia
Jul 18, 2005
#105
  • Jul 18, 2005
  • #105
hotmustang331 said:
Those hoses you guys are posting that your pouring that stuff into is not the PCV hose...you do realize that right? IMO you shouldnt put it into the PCV (unless its not liquid) because if its heavy enough it will run back into the filter. But if it doesnt, it would clean the TB. I just put a oil seperator inline on my PCV hose, so it may be a little tougher for me LOL. Hasnt cought any oil though, it will once I start romping on it again though LOL.
Click to expand...

I thought u were suppose to pull the PVC pipe out and let it suck up the seafoam/? Thats what the directions say on bottle. you are saying it should not be used in the PCV?
 
0

02_TruBlu

Founding Member
Sep 19, 2002
54
0
0
Pittsburgh
Jul 18, 2005
#106
  • Jul 18, 2005
  • #106
I used Seafoam right after my oil separator install. I used the extra fuel line hose as the straw; wedged the can of seafoam between radiator and battery, ran the xtra hose from the intake into the can. There was a lot of smoke. Was fun actually. I smoked screened some kiddies who were on there bicycles and a few cars going down the road.
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Jul 18, 2005
#107
  • Jul 18, 2005
  • #107
I can't believe this thread still lives....
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jul 18, 2005
#108
  • Jul 18, 2005
  • #108
It lives on because Seafoam is so great!
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Jul 18, 2005
#109
  • Jul 18, 2005
  • #109
Kilgore Trout said:
It lives on because Seafoam is so great!
Click to expand...
OMG I FOUND HIM, I FOUND HIM!!! HERE HE IS RIGHT HERE!! EVERYONE COME AND LOOK!! OMG! HE'S ALIVE!!! OMG OMG OMG!

Where've you been man? We had a "missing" thread posted about you. Check it out
 

Nater

New Member
Sep 5, 2003
239
0
0
Maplewood, MN
Jul 18, 2005
#110
  • Jul 18, 2005
  • #110
97GTSTANG said:
I thought u were suppose to pull the PVC pipe out and let it suck up the seafoam/? Thats what the directions say on bottle. you are saying it should not be used in the PCV?
Click to expand...
Do not put it through the PCV valve. Put it through the hose that it connects to it and the upper plenum.
 

bryan0

New Member
Jun 9, 2005
175
0
0
Bethel, CT
Jul 18, 2005
#111
  • Jul 18, 2005
  • #111
Hmmmmmm... do you think maybe if I mixed some phosphorescent glow-in-the-dark paint in with the seafoam, I could make some glow in the dark smoke? That would be pretty sick flying down the highway. Those damn ricers think underbody neons are cool, wait till they see this I'll be like ""
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Jul 18, 2005
#112
  • Jul 18, 2005
  • #112
Snake Oil - why do we suddenly fell like we have to clean out the inside of our engines, especially by pouring some liquid crap into it? You'll likely do more harm then good, especially with older engines.
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Jul 25, 2005
#113
  • Jul 25, 2005
  • #113
twogts4us said:
Snake Oil - why do we suddenly fell like we have to clean out the inside of our engines, especially by pouring some liquid crap into it? You'll likely do more harm then good, especially with older engines.
Click to expand...
bing bing bing bing!!!
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jul 25, 2005
#114
  • Jul 25, 2005
  • #114
Damn....leave it to you to revive yet another thread that should have died a long time ago.
 
W

WillDuhhBeast

New Member
Jun 25, 2005
339
0
0
Jacksonville Florida
Jul 25, 2005
#115
  • Jul 25, 2005
  • #115
First attempt at seafoam, and NO smoke. Nothing happened. I was putting into the plenum where it connects to the tub that goes to the pcv.


I dont know where I was supposed to put it.. but that seemed like the ONLY place i could find suction. It went in, and the car would rev to like three, and then try to die.. No smoke, nothing else happened.



What was I doing wrong?
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Jul 25, 2005
#116
  • Jul 25, 2005
  • #116
WillDuhhBeast said:
First attempt at seafoam, and NO smoke. Nothing happened. I was putting into the plenum where it connects to the tub that goes to the pcv.


I dont know where I was supposed to put it.. but that seemed like the ONLY place i could find suction. It went in, and the car would rev to like three, and then try to die.. No smoke, nothing else happened.



What was I doing wrong?
Click to expand...

did you turn the car off after you put in the seafoam and let it sit for 10mins or so?
 
W

WillDuhhBeast

New Member
Jun 25, 2005
339
0
0
Jacksonville Florida
Jul 25, 2005
#117
  • Jul 25, 2005
  • #117
Yea, went back out there just a fe ago, cranked her up, and revved pretty high.. nothing. Either I have a completely carbon free 65k engine (lol) or something didnt work right.


I have no friggin clue what to do. I'm going to put the rest in my damn gas tank.
 

97GTSTANG

Founding Member
May 25, 2000
852
0
17
Virginia
Jul 25, 2005
#118
  • Jul 25, 2005
  • #118
When i put the seafoam in my car, nothing happened either, but when i took it for a spin i was shifting at 6K and the smoke started to come out. and the car drove a lot better. Did you also make sure the car was hot when you put the seafoam in?
 
W

WillDuhhBeast

New Member
Jun 25, 2005
339
0
0
Jacksonville Florida
Jul 25, 2005
#119
  • Jul 25, 2005
  • #119
Geez, amazing how one drive can change my mind.


So no smoke, no visual signs.. but you can feel the difference. No lag when I put it into gear... 1-2 felt like I was ice skating and when i hit the gas, it WENT. Amazing product.
 
J

jeffstanggt04

New Member
Apr 1, 2005
71
0
0
Jul 25, 2005
#120
  • Jul 25, 2005
  • #120
ive used seafoam on every car i have ever had, i used to have a 90 rs camaro with a 305, i would put a can thru the throttle body every other oil change, it would smoke like hell for about 15 mins but it sure did make the car run better, its the best **** u can buy to clean the carbon out of ur engine, i wont buy anything else, i plan to use it in the stang once it gets some miles on it, i used seafoam and duralube in my camaro and they are some of the best products ive used on a car, i used to constantly burn the tires of the camaro redline it, it had 260k miles on it when my girlfriend wrecked it it never used oil and didnt smoke, so if that tells u anything these are good products
 
Prev
  • 1
  • …
  • 4
  • 5
  • 6
  • 7
  • 8
  • …
  • 42
Next
First Prev 6 of 42 Next Last
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
284
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Eastern North Carolina Autocross Events!
  • Warhorse Racing
  • Feb 23, 2026
  • Regional Forums and Event Information
Replies
0
Views
345
Regional Forums and Event Information Feb 23, 2026
Warhorse Racing
  • Locked
93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • The Welcome Wagon
Replies
15
Views
558
The Welcome Wagon Oct 28, 2025
Noobz347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
179
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
712
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?