• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Seafoam: Why Didnt My Car Smoke Much At All???

  • Thread starter Thread starter from6to8
  • Start date Start date Oct 28, 2012

from6to8

There's suction so I used that end O_O
15 Year Member
Sep 2, 2012
1,896
142
94
Oct 28, 2012
#1
  • Oct 28, 2012
  • #1
Put seafoam in the car bout an hour ago. Put 1/3 cup in the gas tank, 1/3 in the crankcase, and the remaining via the brake booster line. After 10 mins I started the car, it didnt wana start so I had to give it some gas and got it started, revved it up good for few mins then took on a 10 mile ride. The whole time the car really didnt smoke at all. I was expecting clouds and clouds of smoke and really just saw a little bit initially after getting car started and revving for bout a minute, went back and looked in the rear and saw a little smoke. It actually looked like the car was warming up but I had already had the engine warm.

Thoughts on the not so much smoke guys........

Also, i have the car up on the ramps now and if I don't actually get to fill it back up with oil today after I drain it, shouldn't it be fine? I have to take the T fitting for the oil sender off and fix that leak and might not get it fixed today so just wondering if it will be fine even if it sits a few days; just so long as the old oil/seafoam is drained?

Also, i have the car up on the ramps now and if I don't actually get to fill it back up with oil today after I drain it, shouldn't it be fine? I have to take the T fitting for the oil sender off and fix that leak and might not get it fixed today so just wondering if it will be fine even if it sits a few days; just so long as the old oil/seafoam is drained?
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,302
1,645
214
Acworth, GA
Oct 28, 2012
#2
  • Oct 28, 2012
  • #2
Clean intake I guess.

Kurt
 

from6to8

There's suction so I used that end O_O
15 Year Member
Sep 2, 2012
1,896
142
94
Oct 28, 2012
#3
  • Oct 28, 2012
  • #3
revhead347 said:
Clean intake I guess.

Kurt
Click to expand...
thats what some others have said too. I'm going to call seafoam manu tommorow to see how long I need to drive it with it in system before changing oil. Some have said at least 100 miles , some has said they went maybe 1000
 

JCode95

Member
Oct 29, 2012
42
0
17
Picayune, MS
Oct 29, 2012
#4
  • Oct 29, 2012
  • #4
Did you dump it directly down the intake? Did that to mine and you would swear the head gasket blew.
 

from6to8

There's suction so I used that end O_O
15 Year Member
Sep 2, 2012
1,896
142
94
Oct 29, 2012
#5
  • Oct 29, 2012
  • #5
JCode95 said:
Did you dump it directly down the intake? Did that to mine and you would swear the head gasket blew.
Click to expand...
sucked it in via vacuum. Called manufacturer today and they assured me what i did was correct and that my system was probably just not dirty at all or not very bad
 

ace940

Member
Oct 16, 2011
87
1
17
Oct 29, 2012
#6
  • Oct 29, 2012
  • #6
why did you use the brake booster line? i would have used the vent tube from the oil filler neck. thats what i did for my probe and it worked good.
 

jcgafford

10 Year Member
Jan 7, 2012
1,114
95
104
Adrian, MI
Oct 29, 2012
#7
  • Oct 29, 2012
  • #7
ace940 said:
why did you use the brake booster line? i would have used the vent tube from the oil filler neck. thats what i did for my probe and it worked good.
Click to expand...
not a very strong suction there, alot will just sit in the air intake tube and do nothing. seafoam makes a product for that application to use right at the intake that comes with a little red straw. i have done it both ways and besides cleaning the butterfly plate in the throttle well using the old unpressurized can of seafoam thru the brake booster and letting it slowly be pulled through always gave better results in all of my vehicles.
 

JCode95

Member
Oct 29, 2012
42
0
17
Picayune, MS
Oct 30, 2012
#8
  • Oct 30, 2012
  • #8
Usually i just dump the whole bottle in the tank, but when I do want a good cleaning I pour a third in the tank, third in the brake booster line, and turn my air intake up and slowly pour while running. Didn't know it could be added to oil honestly.
 

from6to8

There's suction so I used that end O_O
15 Year Member
Sep 2, 2012
1,896
142
94
Oct 30, 2012
#9
  • Oct 30, 2012
  • #9
ace940 said:
why did you use the brake booster line? i would have used the vent tube from the oil filler neck. thats what i did for my probe and it worked good.
Click to expand...
yeah basically what jcgaff said. I had read that there wasn't a good suction there. At first i was wondering which end of hose to take off. Either the one at the actual brake booster or the one at the vacuum tree. I took off at tree and there was no suction. Took off at booster and there was a suction so used that end
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Oct 30, 2012
#10
  • Oct 30, 2012
  • #10
brake booster line usually works well. at least for me
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,153
21,324
234
Box behind Walmart
Oct 30, 2012
#11
  • Oct 30, 2012
  • #11
*gives guided tour of facilities*

We're walking, we're walking, and here... is a portion of the technical forum for SN95 cars...

from6to8 said:
yeah basically what jcgaff said. I had read that there wasn't a good suction there. At first i was wondering which end of hose to take off. Either the one at the actual brake booster or the one at the vacuum tree. I took off at tree and there was no suction. Took off at booster and there was a suction so used that end
Click to expand...



... and we're walking... walking....
 
Reactions: stormsedge and ace940

ace940

Member
Oct 16, 2011
87
1
17
Oct 31, 2012
#12
  • Oct 31, 2012
  • #12
idk maybe the probe had more suction at the throttle body because of it having a vaf (volumetric airflow meter) instead of a maf. the vaf was a pretty big restriction before the tb so it would be easier to suck through the open vaccum hose. ////// did i spell vaccum and volumetric wrong? the spell check says i did but they dont have any options for fixing it.
 

Blucifer99

I only understand every 3rd word
Jul 15, 2018
466
31
38
Port Mcnicoll Ontario
Jul 17, 2018
#13
  • Jul 17, 2018
  • #13
dude my 1992 lx didnt smoke at all either and i used a whole can in the throttle body... i made sure none leaked down the cold air intake,,,, i was choked LOL every single video i watched peoples cars smoked like a basturd and here i figured my 27 year old car was gonna smoke like a pig..
Maybe my cars alot cleaner then i thought LOL
 

jozsefsz

15 Year Member
Aug 11, 2013
1,243
332
124
Cleveland OH Area
Jul 18, 2018
#14
  • Jul 18, 2018
  • #14
Or unfortunately with poor compression it might have just all washed down the cylinder wall into the oil-pan. Change your oil if you've poured a whole can of anything down the throttle body and it didn't come out the tailpipe. Sorry to be a downer.
 

Blucifer99

I only understand every 3rd word
Jul 15, 2018
466
31
38
Port Mcnicoll Ontario
Jul 18, 2018
#15
  • Jul 18, 2018
  • #15
My oil was normal alittle blackend but nothing out of the ordinary... and my car has great compression has 160-165 between all cylinders according to my test after the seafoam.. trust me i went thru the check list after my car didnt smoke after the seafoam
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,951
10,589
203
polk county florida
Jul 18, 2018
#16
  • Jul 18, 2018
  • #16
Why the seafoam treatment then?
 

Blucifer99

I only understand every 3rd word
Jul 15, 2018
466
31
38
Port Mcnicoll Ontario
Jul 18, 2018
#17
  • Jul 18, 2018
  • #17
cause i do it once every summer... just to clean stuff out.. plus i noticed my intake and throttle body was alil dirty figured just give it a cleaning with the seafoam.. i honestly think the reason my car didnt smoke was because over the winter i rebuilt the motor..
 

jozsefsz

15 Year Member
Aug 11, 2013
1,243
332
124
Cleveland OH Area
Jul 19, 2018
#18
  • Jul 19, 2018
  • #18
Were you using the spray or the liquid? As you mention going through the throttle-body and cleaning it, not sure how you'd do that with the liquid. The spray isn't going to smoke the same way as a bottle of liquid sucked in through a vacuum line which is what most of the YT videos showing crazy smoke are doing. You may be talking about a different product than the rest of the folks in this thread.
 

from6to8

There's suction so I used that end O_O
15 Year Member
Sep 2, 2012
1,896
142
94
Aug 5, 2018
#19
  • Aug 5, 2018
  • #19
saw this thread was resurrected
 
You must log in or register to reply here.

Similar threads

Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
101
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
735
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
277
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?